Stanley Black & Decker MBX15 user manual Read Wear Eye Manual Protection Hearing Breathing

Page 2

WARNING

Read

Wear Eye

Wear

Wear

Manual

Protection

Hearing

Breathing

 

 

Protection

Protection

Do not operate the breaker unless the following safety instructions have been thoroughly read and understood! Read this manual before installing, operating or maintaining this equipment!

•A flying projectile from the breaker, breaker tool, rock or other material may enter the operator's compartment and cause serious or fatal injury to the operator. Personal protection equipment must be used.

•A flying projectile from the breaker, breaker tool, rock or other material may cause serious or fatal injury to bystanders. Never operate the breaker when bystanders are in the work area.

•On some machines/carriers, the breaker can enter the operator's compartment if it breaks loose and swings toward the operator. Make sure that suitable impact shields are used when operating the breaker with this type of equipment.

•Do not operate the breaker unless all safety decals described in this manual are in place. The decals must be inspected periodically to ensure that all wording is legible. The decals must be replaced if illegible. Replacement decals can be obtained from your authorized Stanley Distributor.

•When operating the breaker you must use ear protection, eye protection, and breath- ing protection.

SERVICING HYDRAULIC TOOLS: This manual contains safety, operation, and detailed maintenance instructions. Servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certified dealer.

WARNING

SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR SERVICE OF THIS TOOL.

REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN AUTHORIZED AND CERTIFIED DEALER.

2 ► MBX15 User Manual

Page 1 Page 3
Image 2
Page 1 Page 3
Contents MBX15 MBX15Read Wear Eye Manual Protection Hearing Breathing Table of Contents Safety Precautions General Safety PrecautionsSafety Precautions Safety Symbols Local Safety RegulationsTool Decals MBX15Preparation for Operation PRE-INSTALLATION InstructionsPRE-OPERATION Long Term Storage LOW-TEMPERATURE WARM-UP ProcedureSecuring the Tool Positioning the Excavator OperationPreparation for USE Positioning the Breaker Tool on the Work MaterialBreaking Breaker BindingBlank Firing Underwater USE Underwater USETool Stop & Lower Bushing Periodic Maintenance ChecksEach DAY Proper USE & Care of Tool Bits Tool Failure not Covered Under WarrantyWORN-OUT Front Bushings or Retainer Pins Blank Firing or Free RunningPrying CorrosionTool Failure Covered Under Warranty Internal Material FlawBlunt MoilChisel Troubleshooting Problem Cause SolutionWhen disengaging the tester a POP of nitrogen is normal Charging the Main AccumulatorRecommended Tie Rod Torque Procedure Recommended Torque ValuesHeat Load Test Flow Test ProceduresTest Procedure Specifications AccessoriesMBX15 Power Cell Illustration MBX15 Power Cell Parts List QTY DescriptionMBX15 Housing Parts Declaration of Conformity Hydraulic Tools

MBX15 specifications

The Stanley Black & Decker MBX15 is a robust and versatile tool designed for professionals and serious DIY enthusiasts alike. Engineered to meet the needs of various applications, this machine stands out in the crowded marketplace of power tools, providing exceptional reliability and performance.

At the heart of the MBX15 is its powerful motor, which delivers impressive torque and speed, enabling users to tackle a wide range of tasks with ease. The efficiency of this motor allows for quick job completion without sacrificing quality. One of the standout features of the MBX15 is its lightweight design, making it easy to handle during extended use. The ergonomically designed handle ensures maximum comfort, reducing fatigue and enhancing user control.

The MBX15 incorporates advanced technologies that set it apart from its competitors. For instance, it features an innovative vibration-dampening system that minimizes user discomfort. This technology is especially beneficial during prolonged operations, allowing for greater precision and fewer errors. Additionally, the tool is equipped with a quick-change system, enabling users to switch attachments seamlessly, thus enhancing productivity.

A distinctive characteristic of the MBX15 is its versatility. It comes with a variety of attachments specifically designed for different applications such as grinding, polishing, and even surface preparation. This multifunctionality makes it an essential addition to any workshop or job site.

The MBX15 also prioritizes safety, incorporating several features to protect users during operation. The integrated safety switch prevents accidental start-ups, and the durable housing safeguards the internal components, ensuring longevity and reliability even in demanding environments.

In terms of design aesthetics, the MBX15 boasts a sleek and modern look, complete with a sturdy build that reflects the quality synonymous with the Stanley Black & Decker brand. This tool not only delivers on performance but also complements the professionalism of its users.

In conclusion, the Stanley Black & Decker MBX15 is a formidable tool equipped with a powerful motor, innovative technologies, and a user-friendly design. Its versatility, coupled with safety features and comfort, makes it an exceptional choice for any project, whether on a professional job site or at home. With its blend of power and efficiency, the MBX15 is truly a reliable partner for all your grinding and surface preparation needs.
Top Page Image Contents