Milwaukee 5362-6 Work Area Safety Power Tool USE and Care, Electrical Safety, Personal Safety

Page 3

GENERAL SAFETY RULES — FOR ALL POWER TOOLS

WARNING!

READ ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-opearted (cordless) power tool.

SAVE THESE INSTRUCTIONS

WORK AREA SAFETY

POWER TOOL USE AND CARE

1.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.

8.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

PERSONAL SAFETY

9.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

10.Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce per- sonal injuries.

11.Avoid accidental starting. Ensure the switch is in the off- position before plugging in. Carrying tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

12.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

13.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

14.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.

15.If devices are provided for the connection of dust extrac- tion and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-re-

16.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

17.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

18.Disconnect the plug from the power source and/or the bat- tery pack from the power tool before making any adjust- ments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the tool acci- dentally.

19.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tools or these instructions to operate power tools. Power tools are danger- ous in the hands of untrained users.

20.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

21.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

22.Use the power tool, accessories and tool bits etc., in accor- dance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

SERVICE

23.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

lated hazards.

page 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operators Manual Page Service Work Area Safety Power Tool USE and CareElectrical Safety Personal SafetyFunctionaldescription Specific Safety RulesExtensioncords Guidelines for Using Extension CordsRecommended Minimum Wire Gauge For Extension Cords GroundingSetting the Depth Gauge Tool AssemblyOperation Page Repairs MaintenanceAccessories Five Year Tool Limited WarrantyUTILISATIONETENTRETIENDEL’OUTILÉLECTRIQUE Conservercesinstructions Sécurité DU Lieu DE TravailSécurité Électrique Sécurité IndividuelleDescriptionfonctionnelle Règles DE Sécurité ParticulièreDirectives pour l’emploi des cordons de rallonge Calibres minimaux recommandés pour Les cordons de rallongeMise À LA Terre Avertissement Cordons DE RallongeRéglage de la jauge de profondeur Montage DE Loutil AvertissementManiement Avertissement Page Réparations Maintenance AvertissementAccessoires Avertissement Garantie Limitée DE L’OUTIL DE Cinq ANSUSO Y Cuidado DE LAS Herramientas Eléctricas GUA0RDE Estas Instrucciones Seguridad EN EL Área DE TrabajoSeguridad Eléctrica Seguridad PersonalReglas Especificas DE Seguridad Descripcion FuncionalHerrimentia Tierra ¡ADVERTENCIA Extensiónes EléctricasGuías para el uso de cables de extensión Cómo colocar el medidor de profundidad Ensambaje DE LA Herramienta ¡ADVERTENCIAOperacion ¡ADVERTENCIA Page Mantenimiento de las herramientas Mantenimiento ¡ADVERTENCIAAccesorios ¡ADVERTENCIA Garantía Limitada DE Cinco AñosSawdust

5362-6, 5362-1 specifications

Milwaukee 5362-1 and 5362-6 are part of Milwaukee's renowned line of heavy-duty tools, designed specifically for professionals in the construction and metalworking industries. These tools showcase Milwaukee's commitment to innovation, durability, and performance, making them a popular choice among tradespeople.

One of the standout features of the Milwaukee 5362-1 and 5362-6 is their powerful motors. Equipped with high-performance components, these tools deliver exceptional torque and speed, enabling users to tackle a variety of demanding tasks with ease. The tools are engineered to handle heavy loads, ensuring reliability while operating in the toughest conditions.

The design of both models is also noteworthy. They are built with a robust and rugged exterior, utilizing advanced materials that provide superior resistance to wear and tear. This durability is complemented by ergonomic designs that enhance user comfort during prolonged use. The balanced weight distribution reduces strain on the user, allowing for extended working hours without compromising performance or safety.

Milwaukee has incorporated advanced technology into these models, including their proprietary REDLINK Plus intelligence. This innovative system ensures optimal performance through advanced communication between the tool and its battery. It effectively manages power and temperature, preventing overload and extending the lifespan of both the tool and its battery. Users benefit from consistent and reliable power, which allows for seamless workflow, especially in high-demand environments.

Another significant aspect of the Milwaukee 5362-1 and 5362-6 tools is their battery technology. These models utilize Milwaukee's REDLITHIUM battery packs, which provide longer run times and enhanced durability compared to traditional batteries. This technology allows users to complete more tasks on a single charge, reducing downtime and increasing productivity on job sites.

Additionally, the Milwaukee 5362-1 and 5362-6 feature easy-to-use controls, making them accessible for users of all skill levels. Various settings allow for customization depending on the application, giving professionals the versatility needed for a range of projects.

In summary, Milwaukee 5362-1 and 5362-6 combine powerful performance, advanced technology, and user-friendly design to stand out in the heavy-duty tool market. These tools are ideal for professionals looking to achieve high-quality results efficiently and reliably.
Top Page Image Contents