POWER TOOL USE AND CARE
16.Do not force the power tool. Use the correct power tool for your applica- tion. The correct power tool will do the job better and safer at the rate for which it was designed.
17.Do not use the power tool if the switch does not turn it on and off.Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
18.Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preven- tive safety measures reduce the risk of starting the tool accidentally.
19.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tools or these instructions to operate power tools. Power tools are dangerous in the hands of untrained users.
20.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
21.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
22.Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
SERVICE
23.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY RULES
1.Hold power tools by insulated grip- ping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make ex- posed metal parts of the tool “live” and shock the operator.
2.Wear ear protectors. Exposure to noise can cause hearing loss.
3.Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
4.Keep hands away from all cutting edges and moving parts.
5.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
6.WARNING! Some dust created by power sanding, sawing, grinding, drill- ing, and other construction activities contains chemicals known to cause cancer, birth defects or other reproduc- tive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from chemically- treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ven- tilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
| FUNCTIONAL DESCRIPTION |
3 |
|
6 |
|
2 | 4 |
1. Side handle | 5 |
2.Clamp
3.Depth gauge rod
4.Trigger
5.Mode selector lever
6.SDS Plus bit holder
7.Forward/Reverse Control switch
1 | 7 |
|
Specifications
|
|
|
|
|
|
| Capacities |
|
|
|
|
| Tool |
| Drill Only | Rotary Hammer | |||
Cat. |
|
| No Load | No Load | Twist | Twist | Carbide Tipped |
|
|
Volts |
| Blows per | Drill Bit Drill Bit | Percussion | Thin Wall | ||||
No. | AC | A | RPM | Minute | (Wood) (Steel) | Bit (concrete) | Core Bit | ||
120 | 7 | 0 - 1400 | 0 - 5980 | 1/2" | 1" |
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Symbology
| Double Insulated | BPM | Blows per Minute (BPM) |
|
| ||
|
|
|
|
| Underwriters Laboratories, Inc. |
| Volts Alternating Current |
|
|
|
|
| Amps |
| No Load Revolutions per |
|
| Minute (RPM) | |
|
|
| |
|
|
|
|
|
|
| Mexican Approvals Marking |
|
|
|
|
4 | 5 |