Miller Electric XMT 350 VS manual XMT 350 CC/CV Control Panel

XMT® 350 VS Control Panel

Manufactured Under the Following US Patents:

5,601,741 5,642,260 5,902,150

6,002,103 6,115,273 6,193,548

6,239,407 6,266,257 6,625,046

6,611,189 6,426,888 Other Patents Pending

1

3

4

Additional Features

Low OCV Stick — A built-in, selectable feature, that reduces the Stick mode open-circuit voltage (OCV) to nearly

15 volts when the welding power source is not in use. Eliminates the need for add-on voltage reducers.

2 5

1.Voltmeter

2.Process Selector Switch (Rotary Switch)

3.Ammeter

4.Voltage/Amperage Adjustment Control

5.Arc Control

NOTE: VS model is equipped with Tweco-style output connector.

Note: VS model is available only with Tweco-style weld cable disconnects. Tweco cable connectors are not supplied with the unit and must be ordered separately.

Optional 115 VAC auxiliary power is not available on VS model.

Pulsed MIG (GMAW-P) capability is not available on VS model.

XMT® 350 CC/CV Control Panel
Manufactured Under the			4
Following US Patents:
5,601,741	5,642,260	5,902,150
6,002,103	6,115,273	6,193,548
6,239,407	6,266,257	6,625,046
6,611,189	6,426,888
Other Patents Pending
1			5

CC

2 6

3

1.Voltmeter

2.Remote Control Receptacle

3.Process Selector Switch (Rotary Switch)

4.Ammeter

5.Voltage/Amperage Adjustment Control

6.Arc Control

Additional Features

Auto Remote Sense™ enables unit to automatically use remote control if connected to remote control receptacle.

Low OCV Stick — A built-in, selectable feature, that reduces the Stick mode open-circuit voltage (OCV) to nearly

15 volts when the welding power source is not in use. Eliminates the need for add-on voltage reducers.

Dinse International-style weld disconnects provide high-quality weld cable connections. Dinse and Tweco connectors are available. When Dinse connectors are specified, two connectors are supplied with the unit.

Optional 115 VAC auxiliary power provides 10 amps of circuit-breaker-protected power for water circulators, etc.

Pulsed MIG (GMAW-P) capabilities with optional Optima™ control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission.

3