Power Tool Safety Rules, Work Area | Bosch Power Tools 11250VSRD

BM 1619929567 10-03 3/2/04 9:40 AM Page 2

		Power Tool Safety Rules
		Read and understand all instructions. Failure to follow all instructions
	! WARNING
		listed below, may result in electric shock, fire and/or serious personal injury.

		SAVE THESE INSTRUCTIONS

Work Area

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep by-standers, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

Double Insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double Insulation eliminates the need for the three wire grounded power cord and grounded power supply system. Before plugging in the tool, be certain the outlet voltage supplied is within the voltage marked on the nameplate. Do not use “AC only” rated tools with a DC power supply.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. If operating the power tool in damp locations is unavoidable, a Ground Fault Circuit Interrupter must be used to supply the power to your tool. Electrician’s rubber gloves and footwear will further enhance your personal safety.

Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W." These cords are rated for outdoor use and reduce the risk of electric shock. Refer to “Recommended sizes of Extension Cords” in the Accessory section of this manual.

Personal Safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Keep handles dry, clean and free from oil and grease.

Avoid accidental starting. Be sure switch is “OFF” before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch “ON” invites accidents.

Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

-2-

11250VSRD, 11250VSR specifications

Bosch Power Tools has long been a trusted name in the power tool industry, offering high-quality products designed for both professional and DIY users. Among their impressive lineup, the Bosch 11250VSR and 11250VSRD rotary hammers stand out due to their versatility, performance, and innovative features tailored to meet a broad range of drilling and demolition needs.

The Bosch 11250VSR is a robust rotary hammer drill that provides powerful performance with a 7.5-amp motor, delivering an impressive 0-1,300 RPM and 0-4,800 BPM. This model is known for its ability to drill through concrete, masonry, and other tough materials with ease, making it an excellent choice for construction professionals and home improvement enthusiasts alike. The dual-mode capability allows users to switch between rotary hammer mode for chiseling and hammer-only mode for light demolition work or chasing pipes.

Complementing the 11250VSR, the model 11250VSRD offers similar power and features, with added benefits like a variable speed trigger for enhanced control during delicate applications. Both models come equipped with Bosch’s SDS-plus chuck system, which enables quick and easy bit changes without the need for additional tools. This feature is especially useful for users who need to switch between different drilling tasks rapidly.

In terms of technologies, Bosch integrates advanced vibration control into both models, significantly reducing user fatigue during extended periods of operation. This technology is crucial for professionals who require hours of drilling without compromising comfort or precision. The ergonomic design of these rotary hammers, complete with soft-grip handles, further enhances user comfort, ensuring that the tool can be operated effectively over long durations.

Additionally, the Bosch 11250VSR and 11250VSRD are designed with durability in mind. Metal gear housings and high-quality components ensure that these tools can withstand the rigors of any job site. The built-in clutch also provides added protection by reducing the risk of tool damage during stalls or bind-ups.

Overall, the Bosch 11250VSR and 11250VSRD rotary hammers exemplify Bosch's commitment to innovation, quality, and user-focused design. With their powerful motors, versatile functionalities, and advanced technologies, these tools are ideal for anyone looking to tackle demanding drilling and chipping tasks with efficiency and ease. Whether you're a professional contractor or a DIY enthusiast, investing in a Bosch rotary hammer can significantly enhance your productivity and overall project results.