INTRODUCTION
ForewordSpecifications
The specifications, details, and photographs in this manual represent the Model H8210 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly.
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
Bit Size | 10mm (13/32") | |
Bore Diameter | 3/4" | |
Blows Per Minute | 4,500 BPM | |
Air Consumption | 5 CFM | |
Air Inlet | 1/4" | |
Required PSI | 90 PSI | |
Maximum Sound Level | 108 dB | |
Weight | 4 lbs | |
| A |
|
|
| C |
|
| D |
| B |
|
| E | F |
| Figure 1. H8210 Inventory | |
Model H8210 Inventory | Qty | |
A. | Case | 1 |
B. | Bits | 5 |
C. | Air Gun | 1 |
D. | Retainer Spring | 1 |
E. | 1/4" NPT Male Quick Connect Fitting 1 | |
F. | Oil Bottle | 1 |
No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this air hammer and other machinery with caution and respect. Failure to do so could result in serious personal injury, damage to equipment, or poor work results.
Model H8210 10 Piece Air Hammer Kit |