Hitachi H 65 instruction manual Grounding Instructions

Page 5

GROUNDING INSTRUCTIONS

This power tool should be grounded while in use to protect the operator from electric shock. The power tool is equipped with a three-conductor cord and three-prong grounding type plug to fit the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or green and yellow) wire to a live terminal. If your unit is for use on less than 150 volts, it has a plug that looks like that shown in sketch (A) in Figure on the right. An adapter (see sketches (B) and (C)) is available for connecting sketch (A) type plugs to two- prong receptacles. The green-colored rigid ear, lug, or the like, extending from the adapter must be connected to a permanent ground, such as a properly grounded outlet box.

WARNING:

The grounding adaptor, sketch (C), is prohibited in Canada by Canadian Electrical Code Part 1. Therefore, the instructions for

its use are not applicable in Canada.

Grounding

 

Cover of

(A)

Grounded

Blade

Outlet Box

 

 

Cover of

 

Grounded

 

Outlet Box

(B)

Adapter

 

Grounding

(C)Means

4

Image 5
Contents Demolition Hammer Model H Page Page Page Grounding Instructions Make Them Available to Other Users of this Power Tool Accessories SpecificationsStandard Accessories Name of PartsPrior to Operation ApplicationOIL Feeding OperationInspecting this demolition hammer Maintenance and InspectionPage Hitachi Koki Canada Co