5.Do not force the Demolition Hammer. This tool will do the work better and safer at the speed and capacity for which it was designed.
6.WARNING! Keep hands, fingers, and feet safety away from the cutting area.
7.Never leave the Demolition Hammer unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
8.Before using the Demolition Hammer, check to make sure the Chisel is properly mounted in the Slider of the tool. Make sure the Chisel is sharp, and is not cracked or bent.
9.Industrial applications must follow OSHA guidelines.
10.Always hold the Demolition Hammer with both hands by its insulated gripping surfaces; this offers protection against electrical shock, if the tool’s Chisel contacts hidden wiring or its own Power Cord.
11.Do not drill or break into existing walls, floors, or other blind areas where electrical wiring may exist. If this situation is unavoidable, disconnect all fuses or circuit breakers feeding the worksite.
12.Use a metal detector to determine if there are gas or water pipes hidden in the work area or call the local utility company for assistance before beginning the operation. Striking or cutting into a gas line will result in explosion. Water entering an electrical device may cause electrocution.
13.Position yourself to avoid being caught between the Demolition Hammer or Auxiliary Handle and walls or posts. Should the Chisel become bound or jammed in the work, the reaction of the tool could crush your hand or leg.
14.Do not strike the Chisel with a handheld hammer or sledge hammer when attempting to dislodge a bound or jammed Chisel. Fragments of metal from the Chisel could dislodge and strike you or bystanders.
15.Never place the Demolition Hammer down until the Motor has come to a complete stop.
16.The Chisel may become hot after prolonged use. When removing the Chisel from the tool, avoid contact with skin and use proper protective gloves when grasping the Chisel.
SKU 93853 | For technical questions, please call | PAGE 6 |