17.Do not force the Chisel into the workpiece when cutting. Apply moderate pressure, allowing the Chisel to cut without being forced.
18.Never attempt to remove material stuck in the moving parts of the Demolition Hammer while it is plugged in and running.
19.Always unplug the Demolition Hammer from its electrical outlet before performing and inspection, maintenance, or cleaning procedures.
20.Keep this product and all other tools and equipment away from children and other unauthorized people. Do not allow spectators in the work area.
21.Performance of this tool (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance.
22.Use the right tool for the job. Do not attempt to force a small tool to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool, and do not use this tool for a purpose for which it is not intended.
23.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from
24.
WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.
25.
WARNING! The warnings and cautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
SKU 93853 | For technical questions, please call | PAGE 7 |