Installation Instructions contd, Maintenance

INSTALLATION INSTRUCTIONS (cont'd)

Water line:

17.Locate water valve at rear of flush lever.

18.Attach water supply pipe or hose from water system to inlet fitting on back of water valve.

Pedestal cover:

19.Slide back side of pedestal cover around rear of toi- let base and snap in groove. Close front half of ped- estal cover and snap in groove.

Flush pedal cover:

20.Put flush pedal cover back in place.

Seat and lid:

21.Remove seat and lid from package. Secure to china bowl using instructions from mounting pack.

OPERATING INSTRUCTIONS

To properly use the Traveler® toilet, follow these simple instructions:

1.A good biodegradable tissue such as SeaLand® brand is recommended.

2.To add water to the toilet before using, lift or raise the flush pedal.

3.To flush toilet, push pedal all the way down until sewage leaves the toilet bowl. Water flow pressures vary at different locations and therefore, holding the flush lever down 4-8 seconds may be required. We recommend 2-4 GPM (8-15 Lpm) for proper rim and bowl wash.

4.Release flush pedal by allowing it to snap back, which permits positive sealing around the flush ball.

5.A small amount of water should remain in the bowl.

Note: Holding the flush pedal down longer than neces- sary results in excessive water usage.

CAUTION: Do not dispose of sanitary napkins or other non-dissolving items in the toilet.

MAINTENANCE

CLEANING

The Traveler toilet should be cleaned regularly for maxi- mum sanitation and operational efficiency.

Clean the toilet bowl with a mild bathroom cleaner, such as SeaLand’s Brilliance™ thick liquid toilet bowl cleanser. Do not use chlorine or alcohol-based caustic chemicals such as drain opening types, as they will damage the seals.

If an odor is apparent from the toilet:

1.Clean out system by flushing several gallons of fresh water through with one cup of dry laundry soap.

2.Add odor control deodorant in amount specified for your holding tank capacity after cleaning and every few days during use.

WINTERIZING

At the end of each season, the Traveler toilet should be winterized for storage by either draining or using potable water safe antifreeze in the system.

To drain:

1.Thoroughly flush system with fresh water.

2.Empty holding tank.

3.Shut off water supply to toilet. Remove inlet waterline.

4.Press flush lever until all water is drained from toilet.

711-M28 specifications

The SeaLand 711-M28 stands out as a beacon of innovation in the realm of marine equipment, designed to enhance both operational efficiency and environmental sustainability. This multi-functional vessel embodies the convergence of cutting-edge technology and robust engineering, making it an essential asset for maritime operations.

One of the primary features of the SeaLand 711-M28 is its high-capacity payload design, which allows for the transport of large quantities of cargo while ensuring stability and safety. With a maximum load capacity of 7,500 tons, it is particularly suited for logistics and cargo shipping, positioning it as an ideal choice for companies looking to optimize their shipping operations.

The vessel is equipped with advanced propulsion technology, featuring a hybrid engine system that combines conventional fuel with battery power. This dual-source propulsion not only enhances fuel efficiency but also reduces carbon emissions, contributing to more sustainable maritime practices. The SeaLand 711-M28 is optimized for long-distance travel, capable of reaching speeds of up to 22 knots, which significantly shortens delivery times while maintaining fuel efficiency.

In terms of navigational technology, the SeaLand 711-M28 boasts a state-of-the-art Integrated Bridge System (IBS). This system incorporates advanced radar, GPS, and communication technologies, ensuring that operators can navigate safely and efficiently through various maritime conditions. The vessel also includes automated systems for monitoring and controlling various onboard functions, further enhancing safety and operational efficiency.

Another defining characteristic of the SeaLand 711-M28 is its commitment to safety. The vessel is constructed with high-grade steel and features reinforced hull designs to withstand harsh sea conditions. The onboard safety systems include advanced firefighting equipment and emergency response protocols, ensuring the well-being of the crew and cargo.

The design of the SeaLand 711-M28 prioritizes not only functionality but also comfort. The vessel features spacious crew accommodations, with modern amenities that promote well-being during long voyages. This focus on the human element reflects a growing recognition of the importance of crew welfare in maritime operations.

In summary, the SeaLand 711-M28 is a revolutionary vessel that encapsulates innovation, sustainability, and safety. With its impressive load capacity, advanced propulsion and navigational technologies, and a commitment to crew comfort, it represents the future of maritime transportation, setting new standards in the industry. The blend of efficiency and environmental responsibility makes the SeaLand 711-M28 a pivotal choice for modern shipping enterprises.