SeaLand 711-M28 Installation Instructions cont’d, Dockside Discharge Fitting, Toilet Installation

Page 3

INSTALLATION INSTRUCTIONS (cont’d)

5.Apply waterproof caulk around underside of thru-hull vent fitting.

6.Install thru-hull vent fitting and secure snugly with nut. Wipe off excess caulk with damp cloth.

7.Attach remaining end of vent hose to thru-hull fitting with hose clamp.

Dockside Discharge Fitting:

(not supplied by SeaLand)

8.Drill hole in deck directly above Traveler toilet. Hole location is determined by routing space and length of hose.

9.Screw 1-1/2" FPT x 1-1/2" hose barb into bottom of deck fitting.

10.Apply waterproof caulk around deck hole and install deck fitting into 2-1/4" (57mm) hole with screws. Wipe off excess caulk with a damp cloth.

11.Install 1-1/2" MPT x HUB adapter into discharge fit- ting on holding tank.If necessary, PVC cement el- bow and hose adapter or hose adapter only into 1-1/2" (38mm) adapter. Secure 1-1/2" (38mm) hose to adapter with hose clamp.

or

12.Route hose from tank to deck fitting and secure with hose clamp.

Note: The holding tank on the 711-M28 is designed to withstand discharge by a properly operating discharge pump.

Toilet Installation:

13.Push button on back of flush pedal, then pull flush pedal cover away from pedal to expose water valve. Remove plastic pedestal cover from toilet base.

14.Install the (4) 1/4-20 x 1-3/4" long studs in inserts on the tank top.

15.Place floor flange seal on studs, aligning the studs with bumps on seat. Note: “THIS SIDE UP” should face upwards.

16.Place toilet on studs and secure with four washers and four nuts.

3

Image 3
Contents 711-M28 Recommendations Table of ContentsSpecifications Installation InstructionsInstallation Instructions cont’d Toilet InstallationDockside Discharge Fitting Operating Instructions Installation Instructions contdMaintenance CleaningModel Identification Maintenance cont’dCustomer Service Preparing for Summer USEProblem Possible Cause Service Instructions Troubleshooting Guide711-M28 Traveler Item Part no Description Parts ListOther Rights MANUFACTURER’S ONE-YEAR Limited WarrantyExclusions Implied Warranties

711-M28 specifications

The SeaLand 711-M28 stands out as a beacon of innovation in the realm of marine equipment, designed to enhance both operational efficiency and environmental sustainability. This multi-functional vessel embodies the convergence of cutting-edge technology and robust engineering, making it an essential asset for maritime operations.

One of the primary features of the SeaLand 711-M28 is its high-capacity payload design, which allows for the transport of large quantities of cargo while ensuring stability and safety. With a maximum load capacity of 7,500 tons, it is particularly suited for logistics and cargo shipping, positioning it as an ideal choice for companies looking to optimize their shipping operations.

The vessel is equipped with advanced propulsion technology, featuring a hybrid engine system that combines conventional fuel with battery power. This dual-source propulsion not only enhances fuel efficiency but also reduces carbon emissions, contributing to more sustainable maritime practices. The SeaLand 711-M28 is optimized for long-distance travel, capable of reaching speeds of up to 22 knots, which significantly shortens delivery times while maintaining fuel efficiency.

In terms of navigational technology, the SeaLand 711-M28 boasts a state-of-the-art Integrated Bridge System (IBS). This system incorporates advanced radar, GPS, and communication technologies, ensuring that operators can navigate safely and efficiently through various maritime conditions. The vessel also includes automated systems for monitoring and controlling various onboard functions, further enhancing safety and operational efficiency.

Another defining characteristic of the SeaLand 711-M28 is its commitment to safety. The vessel is constructed with high-grade steel and features reinforced hull designs to withstand harsh sea conditions. The onboard safety systems include advanced firefighting equipment and emergency response protocols, ensuring the well-being of the crew and cargo.

The design of the SeaLand 711-M28 prioritizes not only functionality but also comfort. The vessel features spacious crew accommodations, with modern amenities that promote well-being during long voyages. This focus on the human element reflects a growing recognition of the importance of crew welfare in maritime operations.

In summary, the SeaLand 711-M28 is a revolutionary vessel that encapsulates innovation, sustainability, and safety. With its impressive load capacity, advanced propulsion and navigational technologies, and a commitment to crew comfort, it represents the future of maritime transportation, setting new standards in the industry. The blend of efficiency and environmental responsibility makes the SeaLand 711-M28 a pivotal choice for modern shipping enterprises.