SeaLand 711-M28 owner manual Troubleshooting Guide, Problem Possible Cause Service Instructions

Page 6

TROUBLESHOOTING GUIDE

Problem

Possible Cause

Service Instructions

1.Water will not stay in bowl. a. Loose clamp.

b.Improper seal around flush ball due to dirt or debris on underside of Teflon ball seal.

a.Tighten clamp ring adjusting nut.

b.Inspect flush ball and underside of Teflon® seal for foreign objects.

c. Worn or damaged seal.

c.

Replace seal.

d. Worn or damaged flush ball.

d.

Replace flush ball.

2.Plastic flush ball will not close completely.

a.Clamp ring is overtightened, causing too much tension on seal and flush ball.

b.Weak or defective spring cartridge.

a.Loosen clamp ring.

b.Check spring tension by letting up on flush lever suddenly. If lever does not snap back, replace spring cartridge.

3.Water does not shut off in toilet (toilet overflows).

a.Dirt lodged in water valve seal.

b.Cam strap is bent down, holding water valve open.

c.Worn or defective water valve.

d.Worn or defective spring cartridge.

a.Disassemble and clean water valve.

b.Bend front of cam strap up about 1/16" (1.6mm).

c.Replace valve assembly.

d.Replace spring cartridge.

4. Water does not enter toilet

a.

Low water pressure.

a.

Check incoming water pressure.

bowl properly.

b.

Water valve clogged.

b.

Remove and clean filter screen

 

 

 

 

located on inlet of water valve.

5.Water leaking from water valve.

a.Loose connection.

b.Worn or defective water valve.

c.Water line connection not seated properly.

a.Tighten bottom cap, inlet fitting and outlet hose clamp.

b.Replace water valve.

c.Correct.

 

d.

Stripped threads.

d.

Replace water valve.

 

e.

Seal worn or missing.

e.

Replace water valve.

 

f.

Valve body cracked.

f.

Replace water valve.

 

 

 

 

 

6. Water leaking from rear of

a.

Loose hose connection.

a.

Tighten hose connections.

toilet bowl.

b.

Loose vacuum breaker.

b.

Tighten vacuum breaker-to-bowl

 

 

 

 

connection.

 

c.

Worn or defective vacuum breaker.

c.

Replace vacuum breaker

 

 

 

 

assembly.

 

d.

Cracked or defective toilet bowl.

d.

Replace toilet bowl.

6

Image 6
Contents 711-M28 Installation Instructions Table of ContentsSpecifications RecommendationsInstallation Instructions cont’d Toilet InstallationDockside Discharge Fitting Cleaning Installation Instructions contdMaintenance Operating InstructionsPreparing for Summer USE Maintenance cont’dCustomer Service Model IdentificationTroubleshooting Guide Problem Possible Cause Service InstructionsParts List 711-M28 Traveler Item Part no DescriptionImplied Warranties MANUFACTURER’S ONE-YEAR Limited WarrantyExclusions Other Rights

711-M28 specifications

The SeaLand 711-M28 stands out as a beacon of innovation in the realm of marine equipment, designed to enhance both operational efficiency and environmental sustainability. This multi-functional vessel embodies the convergence of cutting-edge technology and robust engineering, making it an essential asset for maritime operations.

One of the primary features of the SeaLand 711-M28 is its high-capacity payload design, which allows for the transport of large quantities of cargo while ensuring stability and safety. With a maximum load capacity of 7,500 tons, it is particularly suited for logistics and cargo shipping, positioning it as an ideal choice for companies looking to optimize their shipping operations.

The vessel is equipped with advanced propulsion technology, featuring a hybrid engine system that combines conventional fuel with battery power. This dual-source propulsion not only enhances fuel efficiency but also reduces carbon emissions, contributing to more sustainable maritime practices. The SeaLand 711-M28 is optimized for long-distance travel, capable of reaching speeds of up to 22 knots, which significantly shortens delivery times while maintaining fuel efficiency.

In terms of navigational technology, the SeaLand 711-M28 boasts a state-of-the-art Integrated Bridge System (IBS). This system incorporates advanced radar, GPS, and communication technologies, ensuring that operators can navigate safely and efficiently through various maritime conditions. The vessel also includes automated systems for monitoring and controlling various onboard functions, further enhancing safety and operational efficiency.

Another defining characteristic of the SeaLand 711-M28 is its commitment to safety. The vessel is constructed with high-grade steel and features reinforced hull designs to withstand harsh sea conditions. The onboard safety systems include advanced firefighting equipment and emergency response protocols, ensuring the well-being of the crew and cargo.

The design of the SeaLand 711-M28 prioritizes not only functionality but also comfort. The vessel features spacious crew accommodations, with modern amenities that promote well-being during long voyages. This focus on the human element reflects a growing recognition of the importance of crew welfare in maritime operations.

In summary, the SeaLand 711-M28 is a revolutionary vessel that encapsulates innovation, sustainability, and safety. With its impressive load capacity, advanced propulsion and navigational technologies, and a commitment to crew comfort, it represents the future of maritime transportation, setting new standards in the industry. The blend of efficiency and environmental responsibility makes the SeaLand 711-M28 a pivotal choice for modern shipping enterprises.