Chauvet Spot LED 150 user manual Product at a Glance, Dmx

Page 4

Product at a

Glance

Use on Dimmer

Outdoor Use

Sound Activated

DMX

Master/Slave

Auto Programs

Auto-ranging Power Supply

Replaceable Fuse

User Serviceable

Duty Cycle

Safety Notes Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage, and maintenance.

•This product is not intended for permanent installation.

•Always connect the product to a grounded circuit to avoid the risk of electrocution.

•Always disconnect the product from the power source before cleaning or replacing the fuse.

•Avoid direct eye exposure to the light source while the product is on.

•Make sure the power cord is not crimped or damaged.

•Never disconnect the product from power cord by pulling or tugging on the cord.

•If mounting the product overhead, always secure to a fastening device using a safety cable.

•Make sure there are no flammable materials close to the product when operating.

•Do not touch the product’s housing when operating because it may be very hot.

•Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the decal or rear panel of the product.

•The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.

•Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

•Be sure that no ventilation slots on the product’s housing are blocked.

•Never connect the product to a dimmer.

•Make sure to replace the fuse with another of the same type and rating.

•Never carry the product from the power cord or any moving part. Always use the hanging/mounting bracket or the handles.

•The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the product at higher temperatures.

•In the event of a serious operating problem, stop using the product immediately.

•Never try to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.

•Keep this User Manual. If you sell the product to another user, be sure that they also receive this document.

Page 4 of 18

Intimidator™ Spot LED 150 User Manual (Rev. 5)

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Table of Contents What Is Included SymbolsBefore YOU Begin Unpacking InstructionsProduct at a Glance DMXIntroduction Product OverviewProduct Dimensions AC Power SetupFuse Replacement Power Linking Mounting Orientation RiggingMode Programming Steps Description DMX Mode OperationControl Panel Operation Press to activate a menu option or a selected valueStarting Address DMX Personalities ConfigurationPress Enter DMX Channel Assignments and Values Channel Function Value Setting11-CH Control Functions Gobo WheelAuto Programs Color Configuration Standalone Slave units Display Orientation Master/Slave Mode Reset SoftwareMaster unit Product Maintenance Technical InformationTechnical Specifications Returns Contact Us World Headquarters United Kingdom & IrelandGeneral Information Technical Support

Spot LED 150 specifications

The Chauvet Spot LED 150 is a compact yet powerful LED spot fixture designed for a wide range of applications, from small venues to mobile events. This fixture is an excellent choice for event planners and lighting designers who seek versatility and high performance without the need for extensive setup.

One of the standout features of the Chauvet Spot LED 150 is its energy-efficient LED technology. With a 30W LED light source, this fixture generates vibrant colors and a powerful output while consuming significantly less energy than traditional lighting solutions. The LED technology also contributes to a longer lifespan, ensuring that users get the most out of their investment with minimal maintenance.

The Spot LED 150 utilizes a 12-degree beam angle, allowing for precise and focused lighting effects. This makes it ideal for creating sharp, defined gobo projections that can enhance any performance or event setting. Additionally, the fixture features a rotating gobo wheel that comes with several interchangeable patterns, giving users the flexibility to customize their lighting designs according to their specific needs.

Another important aspect of the Chauvet Spot LED 150 is its multi-functional capabilities. It can operate in various modes, including DMX control for intricate programming and control over multiple fixtures. The fixture can also run in stand-alone mode or be synchronized with other units, making it suitable for both novice users seeking simple setups and professional lighting designers looking for complex lighting solutions.

This fixture is equipped with built-in dimming capabilities, allowing operators to adjust brightness levels smoothly to create the desired ambiance. The Chauvet Spot LED 150 also features pan and tilt functionalities, enabling wide coverage and dynamic positioning to adapt to different stage setups.

Portability is another significant advantage of the Spot LED 150. Its lightweight design and compact size make it easy to transport and set up, ideal for mobile DJs and production companies. Furthermore, with its durable construction, the fixture is built to withstand the rigors of touring and frequent use.

Overall, the Chauvet Spot LED 150 is a versatile, efficient, and robust lighting solution tailored for both amateur and professional lighting designers. Its combination of powerful LED output, customizable gobo effects, and multi-functionality ensures that it can effectively meet the varied lighting demands of any event or performance.
Top Page Image Contents