Chauvet Spot LED 150 user manual Configuration Standalone, Press Enter

Page 14

Configuration

(Standalone)

Sound Active Mode

Automatic Mode

Manual Pan/Tilt Operation

Pan/Tilt Angle Restrict

Set the product in one of the standalone modes to control without a DMX controller.

1.Connect the product to a suitable power outlet.

2.Turn the product on.

Never connect a product that is operating in any standalone mode (either Static, Automatic, or Sound) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.

To enable the Sound Active mode, do the following:

1.Press <MODE/ESC> repeatedly until one of the following shows on the display: NASl, NAFA, NStS, or SLAv.

2.Press <UP> or <DOWN> to select NStS.

3.Press <ENTER>.

The product will only respond to low frequencies of music (bass and drums).

To enable the Automatic Mode, follow the instructions below:

1.Press <MODE/ESC> repeatedly until one of the following shows on the display: NASl, NAFA, NStS, or SLAv.

2.Press <UP> or <DOWN> to select NASl (for a slow light show) or NAFA (for a fast light show).

3.Press <ENTER>.

To select whether you want the Intimidator™ Spot LED 150 to operate with normal panning or inverted panning, do the following:

1.Press <MODE/ESC> repeatedly until PAn shows on the display.

2.Press <UP> or <DOWN> to select normal pan operation (PAn) or inverse pan operation (r PAn).

3.Press <ENTER>.

To select whether you want the Intimidator™ Spot LED 150 to operate with normal tilting or inverted tilting, do the following:

1.Press <MODE/ESC> repeatedly until tiL shows on the display.

2.Press <UP> or <DOWN> to select normal pan operation (tiL) or inverse pan operation (r tiL).

3.Press <ENTER>.

You are able to restrict the pan and tilt angles on the Intimidator™ Spot LED 150 to achieve the effect you like.

To select which pan angle to use, do the following:

1.Press <MODE/ESC> repeatedly until PA54 shows on the display.

2.Press <UP> or <DOWN> to select either 540° (PA54), 360° (PA36) or 180° (PA18).

3.Press <ENTER>.

To select which tilt angle to use, do the following:

1.Press <MODE/ESC> repeatedly until Ti27 shows on the display.

2.Press <UP> or <DOWN> to select either 270° (Ti27), 180° (Ti18) or 90° (Ti 9).

3.Press <ENTER>.

Page 14 of 18

Intimidator™ Spot LED 150 User Manual (Rev. 5)

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Table of Contents Before YOU Begin What Is IncludedSymbols Unpacking InstructionsProduct at a Glance DMXIntroduction Product OverviewProduct Dimensions Fuse Replacement Power Linking SetupAC Power Mounting Orientation RiggingControl Panel Operation Mode Programming Steps Description DMX ModeOperation Press to activate a menu option or a selected valuePress Enter ConfigurationStarting Address DMX Personalities 11-CH Channel Function Value SettingDMX Channel Assignments and Values Auto Programs Gobo WheelControl Functions Color Configuration Standalone Master unit Display Orientation Master/Slave Mode Reset SoftwareSlave units Product Maintenance Technical InformationTechnical Specifications General Information Returns Contact UsWorld Headquarters United Kingdom & Ireland Technical Support

Spot LED 150 specifications

The Chauvet Spot LED 150 is a compact yet powerful LED spot fixture designed for a wide range of applications, from small venues to mobile events. This fixture is an excellent choice for event planners and lighting designers who seek versatility and high performance without the need for extensive setup.

One of the standout features of the Chauvet Spot LED 150 is its energy-efficient LED technology. With a 30W LED light source, this fixture generates vibrant colors and a powerful output while consuming significantly less energy than traditional lighting solutions. The LED technology also contributes to a longer lifespan, ensuring that users get the most out of their investment with minimal maintenance.

The Spot LED 150 utilizes a 12-degree beam angle, allowing for precise and focused lighting effects. This makes it ideal for creating sharp, defined gobo projections that can enhance any performance or event setting. Additionally, the fixture features a rotating gobo wheel that comes with several interchangeable patterns, giving users the flexibility to customize their lighting designs according to their specific needs.

Another important aspect of the Chauvet Spot LED 150 is its multi-functional capabilities. It can operate in various modes, including DMX control for intricate programming and control over multiple fixtures. The fixture can also run in stand-alone mode or be synchronized with other units, making it suitable for both novice users seeking simple setups and professional lighting designers looking for complex lighting solutions.

This fixture is equipped with built-in dimming capabilities, allowing operators to adjust brightness levels smoothly to create the desired ambiance. The Chauvet Spot LED 150 also features pan and tilt functionalities, enabling wide coverage and dynamic positioning to adapt to different stage setups.

Portability is another significant advantage of the Spot LED 150. Its lightweight design and compact size make it easy to transport and set up, ideal for mobile DJs and production companies. Furthermore, with its durable construction, the fixture is built to withstand the rigors of touring and frequent use.

Overall, the Chauvet Spot LED 150 is a versatile, efficient, and robust lighting solution tailored for both amateur and professional lighting designers. Its combination of powerful LED output, customizable gobo effects, and multi-functionality ensures that it can effectively meet the varied lighting demands of any event or performance.
Top Page Image Contents