Chauvet Spot LED 150 user manual Setup, AC Power, Fuse Replacement Power Linking

Page 7

3.SETUP

AC Power

The Intimidator™ Spot LED 150 has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.

Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0~100% switch.

Disconnect the product from power before replacing the fuse.

Fuse Replacement

Power Linking

Power Linking Diagram

1.Using a flat-head screwdriver, unscrew the fuse holder from the back of the product.

2.Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

3.Insert the fuse holder back in place, re-tighten, and reconnect power.

The product provides power linking via the Edison outlet located in the back of the unit. Please see the diagram below for further explanation.

1

st

Product

2nd Product

3rd Product

 

 

 

Other products

You can power link up to 6 Intimidator™ Spot LED 150 units on 120 VAC or up to 12 Intimidator™ Spot LED 150 units on 230 VAC.

The power linking diagram shown above corresponds to the North American version of the product ONLY! If using the product in other markets, you must consult with the local CHAUVET® distributor as power linking connectors and requirements may differ in your area.

Intimidator™ Spot LED 150 User Manual (Rev. 5)

Page 7 of 18

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Table of Contents Unpacking Instructions What Is IncludedSymbols Before YOU BeginDMX Product at a GlanceProduct Overview IntroductionProduct Dimensions AC Power SetupFuse Replacement Power Linking Orientation Rigging MountingPress to activate a menu option or a selected value Mode Programming Steps Description DMX ModeOperation Control Panel OperationStarting Address DMX Personalities ConfigurationPress Enter DMX Channel Assignments and Values Channel Function Value Setting11-CH Control Functions Gobo WheelAuto Programs Color Configuration Standalone Slave units Display Orientation Master/Slave Mode Reset SoftwareMaster unit Technical Information Product MaintenanceTechnical Specifications Technical Support Returns Contact UsWorld Headquarters United Kingdom & Ireland General Information

Spot LED 150 specifications

The Chauvet Spot LED 150 is a compact yet powerful LED spot fixture designed for a wide range of applications, from small venues to mobile events. This fixture is an excellent choice for event planners and lighting designers who seek versatility and high performance without the need for extensive setup.

One of the standout features of the Chauvet Spot LED 150 is its energy-efficient LED technology. With a 30W LED light source, this fixture generates vibrant colors and a powerful output while consuming significantly less energy than traditional lighting solutions. The LED technology also contributes to a longer lifespan, ensuring that users get the most out of their investment with minimal maintenance.

The Spot LED 150 utilizes a 12-degree beam angle, allowing for precise and focused lighting effects. This makes it ideal for creating sharp, defined gobo projections that can enhance any performance or event setting. Additionally, the fixture features a rotating gobo wheel that comes with several interchangeable patterns, giving users the flexibility to customize their lighting designs according to their specific needs.

Another important aspect of the Chauvet Spot LED 150 is its multi-functional capabilities. It can operate in various modes, including DMX control for intricate programming and control over multiple fixtures. The fixture can also run in stand-alone mode or be synchronized with other units, making it suitable for both novice users seeking simple setups and professional lighting designers looking for complex lighting solutions.

This fixture is equipped with built-in dimming capabilities, allowing operators to adjust brightness levels smoothly to create the desired ambiance. The Chauvet Spot LED 150 also features pan and tilt functionalities, enabling wide coverage and dynamic positioning to adapt to different stage setups.

Portability is another significant advantage of the Spot LED 150. Its lightweight design and compact size make it easy to transport and set up, ideal for mobile DJs and production companies. Furthermore, with its durable construction, the fixture is built to withstand the rigors of touring and frequent use.

Overall, the Chauvet Spot LED 150 is a versatile, efficient, and robust lighting solution tailored for both amateur and professional lighting designers. Its combination of powerful LED output, customizable gobo effects, and multi-functionality ensures that it can effectively meet the varied lighting demands of any event or performance.
Top Page Image Contents