Chicago Electric 42417 On/Off with Locking Trigger Hold, Unpack and Check Contents

To turn on your Spotlight, press down on the Trigger (#11). Pressing down on the Trigger (#11) will engage the Locking Trigger Hold (#10)-see Figure 1. Note: Never leave Spotlight unattended with the Locking Trigger Hold left on.

To release the Trigger Hold (#10), push in on the left side of the Locking Trigger Hold button (#10) -see Figure 1.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO NOT OPERATE THE TOOL.

ABS Housing (1)

On/Off with Locking Trigger Hold

Your Spotlight is equipped with a Trigger Hold to allow you to have the Spotlight on while leaving your hands free for work.

Step 1)

Step 2)

Lamp Lid (5) Car Adapter (14)

Locking Trigger Hold (10)

Trigger (11)

Tripod Adapter (6)

Hanging Strap (12)

Figure 1

Unpacking

UNPACK AND CHECK CONTENTS

When unpacking your Spotlight-1,000,000 Candle Power check to make any parts are missing or broken, please call HARBOR FREIGHT TOOLS

sure the following parts are included. If at 1-800-444-3353.

Parts Listing
Part #	Description	Quantity	Part #	Description	Quantity
1	ABS Housing	1	8	Switch	1
2	Reflector Plastic	1	9	Battery	1
3	Bulb	1	10	Locking Trigger Hold	1
4	Glass	1	11	Trigger	1
5	Lamp Lid	1	12	Hanging Strap	1
6	Tripod Adapter	1	13	Power Adapter	1
7	Circuit Board	1	14	Car Adapter	1

Warning - Battery Disposal

The Spotlight is powered by a battery which will have a long life span. When the battery is no longer functioning, it should be removed from the Spotlight and properly recycled. Many states require recycling. Contact your local solid waste authority for information on recycling.

Before disposing of the battery, wrap exposed terminals with heavy tape to prevent a shorting condition, which could cause fire and/or injury.

NEVER EXPOSE THE BATTERY TO HIGH HEAT OR FIRE; BATTERY MAY EXPLODE UNDER THESE

CONDITIONS.
#42417	REV 11/02	REV 05/05	Page 4