Chicago Electric 66439 operating instructions General Safety Rules, Work area safety

Page 3

8.Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb.

9.Do not operate the Light with a miss- ing or damaged housing (3), lens (21), or grid (23). (See assembly diagram.)

10.Risk of electric shock. Do not use with extension cord near water or where water may accumulate. Keep lamp at least 16 feet (5m) from pools and spas. Keep plugs and recep- tacles dry. For use only on GFCI- protected circuits. Suitable for wet location use.

11.Maintain labels and nameplates on the Light. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

12.Avoid unintentional starting. Prepare to begin work before turning on the Light.

13.Allow the unit to cool down before changing bulbs or storing it.

14.This product is not intended for use in a residence or to be mounted in a cabinet. This product is not suitable for recessed installation in ceilings or on buildings. This product can cause a fire.

15.Do not let cord hang over edge of table or counter, or touch hot sur- faces.

16.Do not leave the Light unattended when it is plugged into an electrical outlet. Turn off the Light, and unplug it from its electrical outlet before leav- ing.

17.This product is not a toy. Keep it out of reach of children.

18.People with pacemakers should consult their physician(s) before use.

Electromagnetic fields in close prox- imity to heart pacemaker could cause pacemaker interference or pacemak- er failure. In addition, people with pacemakers should:

Avoid operating alone.

Properly maintain and inspect to avoid electrical shock.

Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.

19.WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.)

20.The warnings, precautions, and in- structions discussed in this instruction manual cannot cover all possible con- ditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

General Safety Rules

1.Work area safety

a.Keep work area clean and well lit. Cluttered or dark areas invite acci- dents.

SKU 66439

For technical questions, please call 1-800-444-3353.

Page 3

Image 3
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callGeneral Safety Rules Important Safety rules Save This ManualFor technical questions, please call Work area safety General Safety RulesPower source before making any Use safety equipment. AlwaysWear eye protection. Safety Electrical safetyProng Plug and Outlet ServiceGrounding Grounded Tools Tools with Three Prong Plugs25’ 50’ 75’ SymbologyExtension Cords See Table aUnpacking SpecificationsSet Up Instructions Light AssemblyFigure B Stand AssemblyMaintenance Servicing Cleaning, maintenance, LubricationOperating Instructions Part Description Qty Assembly diagramSKU For technical questions, please call Record Product’s Serial Number Here Limited 90 DAY Warranty