Chicago Electric 66439 operating instructions Stand Assembly, Figure B

Page 8

Stand Assembly

43 46

FIGURE B

1.Loosen the Leg Knob (43) and swing the three Legs (46) out and down. Then tighten the Leg Knob.

(See Figure B.)

FIGURE C

2.Attach the lamp assemblies to the Lamp Mounting Bar (55), using the Knobs (53) and Nuts (54).

(See Figure C.)

	53
56	55
	38

FIGURE D

3.Place the bracket on the Y-connector (56) on the Lamp Mounting Bar (55) so that the holes in the center line up. Insert the Knob (53) through the holes. (See Figure D.)

4.Place the Lamp Mounting Bar (55) onto the Upper Tube (38) and secure it in place with the Knob (53).

(See Figure D.)

SKU 66439

For technical questions, please call 1-800-444-3353.

Page 8

Image 8

Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsFor technical questions, please call General Safety Rules Important Safety rulesSave This Manual General Safety Rules Work area safetyUse safety equipment. Always Wear eye protection. SafetyElectrical safety Power source before making anyService GroundingGrounded Tools Tools with Three Prong Plugs Prong Plug and OutletSymbology Extension CordsSee Table a 25’ 50’ 75’Specifications Set Up InstructionsLight Assembly UnpackingStand Assembly Figure BOperating Instructions Maintenance ServicingCleaning, maintenance, Lubrication Assembly diagram Part Description QtySKU For technical questions, please call Limited 90 DAY Warranty Record Product’s Serial Number Here