Craftsman 973.113900 Bulb Replacement, Pulllens Coverforward To Remove, Buttonbulb

Page 6

_k ARNING: When servicing, use only identical Craftsman replacement parts. Use of

any other part may create a hazard or cause product damage.

,_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating

oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.

Do not abuse power tools. Abusive practices can damage tool as well as workpiece.

_k ARNING: Do not attempt to modify this worklight or create accessories not recommended

for use with this worklight. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

BULB REPLACEMENT

See Figure 4.

When purchasing replacement bulb, request recom- mended part number 981258-001. See Figure 4.

TO REPLACE BULB:

Remove battery pack from worklight. See Page 5.

Depress button located on top of len cover then pull lens cover to remove.

Remove old bulb from spring by twisting bulb in a clockwise direction.

LENSCOVER

PULLLENS

COVERFORWARD

TO REMOVE

Insert new bulb in spring by twisting bulb in a clockwise direction.

Replace lens cover aligning tabs inside lens cover with slots on housing then snap into place.

Replace battery pack.

Note: For your convenience, your worklight has a bulb storage area to store an extra bulb. See Figure 4.

BUTTONBULB

SPRING_STORAGEAREA

SLOT

f

REQUESTBULBPARTNO. 981258-001

Fig. 4

Image 6
Contents CRRFrSMRN Read ALL Instructions Avoid Dangerous EnvironmentImportant Safety Instructions for Charger Safety Rules for WorklightsBattery Pack Battery PACK/CHARGERModel NO, Battery Pack Charger Charging Battery PackDepresslatchesto Releasebatterypack To INSTALL/REMOVE Battery PackBattery Pack Latches MULTI-POSITION HeadButtonbulb Bulb ReplacementPulllens Coverforward To Remove RequestbulbpartnoBattery Pack Removal Preparation for Recycling Batteries