_IL WARN(NG:When servicing, use only identical Craftsman replacement parts. Use of any
other part may create a hazard or cause product damage.
_ WARNING: Do not at any time let brake fluids, gasoline,
oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.
BULB REPLACEMENT
See Figures 4 & 5.
When purchasing replacement bulb, request recom- mended part number 780115002. See Figure 5.
TO REPLACE BULB:
[] Remove battery pack from worklight. See Figure 2.
[] Depress button located on top of ]en cover then pull lens cover to remove.
LENSCOVER
DEPRESS
BUTTON
PULLLENS
COVERFORWARD
TO REMOVE
Do not abuse power tools. Abusive practices can damage tool as well as workpiece.
_ WARN(NG: Do not attempt to modify this worklight or create accessories not
recommended for use with this worklight. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible serious personal injury.
[] Remove old bulb from spring by twisting bulb in a clockwise direction.
[] Insert new bulb in spring by twisting bulb in a clockwise direction.
[] Replace lens cover aligning tabs inside lens cover with slots on housing then snap into place.
[] Replace battery pack.
Note: For your convenience, your worklight has a bulb storage area to store an extra bulb. See Figure 5.
BUTTONBULB 8TORAGEAREA
SPRING_
SLOT
TABS \_
REQUEST BULB PART NO.
780115002
Fig. 4 | Fig. 5 |
|