wireless LAN adapter. The front of the PCMCIA adapter (which has the LED and “Smart Wireless” label on it) must be inserted such that it is next to the PCI adapter’s circuit board as follows:
7 Specification
PCI Local Bus Specification Revision 2.1 compliant. PCMCIA 2.1, JEIDA 4.1, and CardBus compliant. 3.3V/5.0V operation.
Intel 82365SL register compatible, ExCA compatible. ATA disk interface support.
Supports
Ambient temperature under bias 0oC to 70oC. Storage temperature
Max. Power Supply on sockets VCC at 3.3V for 1A and VCC at 5.0V for 1A.
8 Troubleshooting
If your computer is COMPAQ DeskPro EN series, you may encounter the following problem: System freezes while booting up after installing PCI adapter in the computer.
Solution:
Before installing the PCI adapter, please go to http://www.compaq.com/
Download the latest version of ROMPaq ROM Image (V2.11 or later), then follow the instructions COMPAQ provides to update the system BIOS. You can install the software and hardware of PCI adapter without problems after a BIOS update.
NOTE: only gentle effort is required to insert a PC card into the PCI adapter. If you have a problem inserting a PC Card into the socket, please do not force the card, because it may cause unexpected damage to the PC card or PCI adapter.
If you have any further questions, please contact your local dealer.
Copyright © 2002 Madge Networks. All rights reserved. | Page 4 |