,_ WARNING: Always wear safety goggles or safety glasses with side shields when operating
tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.
TO ATFACH BA'R'ERY PACK TO WORKLIGHT
See Figure 2.
Note: Battery pack is shipped in a low charge condition. Therefore, it must be charged prior to use. Refer to "CHARGING
•Align raised ribs on battery pack with grooves on bottom of worklight, then attach battery pack to workfight as shown in Figure 2.
•Make sure latch on battery pack snaps into place and battery pack is secured to worklight before turning worklight on.
_k CAUTION: When attaching battery pack to your worklight, be sure raised ribs and grooves align properly and latch snaps into place properly. Improper assembly can cause damage to worklight and battery pack.
RAISEDRIBS
GROOVES
TO REMOVE BATTERY PACK FROM WORKLIGHT
See Figure 3.
•Depress latch located on front of battery pack (1) to release battery pack.
•Pull forward on battery pack (2) to remove from worklight.
DEPRESSLATCHTO
RELEASEBATTERYPACK
PULL
TO REMOVE
BATTERYPACK | Fig. 3 |
LATCH | BATTERYPACK | Fig. 2 |
|
5