Switch, MULTI-POSITION Head, To Replace Bulb

SWITCH

See Figure 4.

To turn your worklight on and off, depress switch trigger.

MULTI-POSITION HEAD

See Figure 4.

Your worklight has the feature of a multi-position head that has positive stop clicks at each position. Rotate head to the desired position as shown in the arrows in Figure 4,

_1= WARNING: When servicing, use only identical Craftsman replacement parts. Use of

any other part may create a hazard or cause product damage.

,_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating

oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.

BULB REPLACEMENT

See Figure 5.

When purchasing replacement bulb, request

recommended part number 981258-001.

TO REPLACE BULB:

•Remove battery pack from worklight.

•Remove the two screws securing lens cover, then remove cover.

•Remove old bulb from spring.

•Position new bulb in spring.

•Replace lens cover and screws.

•Replace battery pack.

Note: For your convenience, a bulb storage area with extra bulb has been provided. It is located behind the lens cover. See Figure 5.

MULTI-POSITION

HEAD

SWITCH

TRIGGER

Fig. 4

Do not abuse power tools. Abusive practices can damage tool as well as workpiece.

,_ WARNING: Do not attempt to modify this worklight or create accessories not recommended

for use with this worklight. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

SCREWS

BULB

EXTRA

BULB

STORAGEAREA

LENSCOVER

FOR MODELNO. 315.268260 REQUESTBULBPARTNO.981258-001 Fig. 5