Dell T5610 Default Setting Enable Intel SpeedStep, States Control, Intel TurboBoost

Option			Description
			NOTE:
			• The options displayed could be
			different depending on the installed
			processor(s).
			• The options depend on the number
			of cores supported by the installed
			processor (All, 1, 2, N-1 for N-Core
			Processors)
Intel SpeedStep			Allows you to enable or disable the Intel
			SpeedStep feature.
			Default Setting: Enable Intel SpeedStep
C States Control			Allows you to enable or disable the additional
			processor sleep states.
			Default Setting:Enabled
Intel TurboBoost			Allows you to enable or disable the Intel
			TurboBoost mode of the processor.
			Default Setting: Enable Intel TurboBoost
Hyper-Thread Control			Allows you to enable or disable the
			HyperThreading in the processor.
			Default Setting: Enabled
Cache Prefetch			Default Setting: Enable Hardware Prefetch
			and Adjacent Cache Line Prefetch
Dell Reliable Memory Technology (RMT)			Allows you to identify and isolate memory
			errors in system RAM..
			Default Setting: Enable Dell Reliable Memory
			Technology (RMT)
			NOTE: This feature is supported in T3610
			only when ECC memory modules are
			installed.
Table 8. Power Management
Option	Description
AC Recovery	Specifies how the computer will respond when AC power is applied after a AC power loss.
	You can set the AC Recovery to:
	•	Power Off (Default)
	•	Power On
	•	Last Power State
Auto On Time	Allows you to set the time at which the computer must turn on automatically. The options
	are:
	•	Disabled (Default)
	•	Every Day
	•	Weekdays
	•	Select Days

51