5.Disconnect the cables to release the I/O panel.
6.Remove the screws which secure the I/O panel to the chassis.
7.Remove the I/O panel from the chassis.
Installing the Input/Output (I/O) Panel
1.Replace the I/O panel in its slot.
2.Tighten the screws securing the I/O panel to the chassis
3.Attach the cables to the I/O panel.
4.Slide the USB 3.0 module in its slot.
5.Tighten the screws securing the USB 3.0 module to the I/O panel.
6.Install:
a.front bezel
b.cover
7.Follow the procedures in After Working Inside Your Computer.
21