Makita 9556NB, 9558NB, 9557NB instruction manual EC Declaration of Conformity

Page 3

For Model 9557NB

ENG102-3

Noise

The typical A-weighted noise level determined according to EN60745:

Sound pressure level (LpA) : 86 dB(A)

Sound power level (LWA) : 97 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG208-5

Vibration

The vibration total value (tri-axial vector sum) determined according to EN60745:

Work mode : surface grinding

Vibration emission (ah,AG) : 7.5 m/s2

Uncertainty (K) : 1.5 m/s2

The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.

The declared vibration emission value may also be used in a preliminary assessment of exposure.

The declared vibration emission value is used for main applications of the power tool. However if the power tool is used for other applications, the vibration emission value may be different.

WARNING:

The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.

Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).

For Model 9558NB

ENG102-3

Noise

The typical A-weighted noise level determined according to EN60745:

Sound pressure level (LpA) : 86 dB(A)

Sound power level (LWA) : 97 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG208-5

Vibration

The vibration total value (tri-axial vector sum) determined according to EN60745:

Work mode : surface grinding

Vibration emission (ah,AG) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.

The declared vibration emission value may also be used in a preliminary assessment of exposure.

The declared vibration emission value is used for main applications of the power tool. However if the power tool is used for other applications, the vibration emission value may be different.

WARNING:

The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.

Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).

ENH101-15

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s):

Designation of Machine: Angle Grinder

Model No./ Type: 9556NB,9557NB,9558NB are of series production and

Conforms to the following European Directives: 2006/42/EC

And are manufactured in accordance with the following standards or standardised documents:

EN60745

The technical documentation is kept by our authorised representative in Europe who is:

Makita International Europe Ltd. Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

30.1.2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

3

Image 3
Contents Angle Grinder Symbols SpecificationsConforms to the following European Directives 2006/42/EC EC Declaration of ConformityGeneral Power Tool Safety Warnings Grinder Safety Warnings Accessory into your body Edge of the workpiece on both sides of the wheel Functional Description AssemblySuper flange accessory OperationGrinding and sanding operation 100 mm Optional Accessories MaintenanceMakita Corporation