Assembling

P 4/ 14

(2)Disassemble the commutator end of Armature as drawn in Fig. 3.

Note: This step is required for the models with electronic control system of GA4041C, GA4043C, GA4541C, GA4543C, GA5041C, GA5043C.

Fig. 3

1.Pick up three tabs of Self lock 6 with tweezers

to remove it from Armature.

Tabs Self lock 6

Tweezers

2.Remove Magnet sleeve, Wave washer 6 and Labyrinth rubber ring 22.

Magnet sleeve

Wave washer 6

Labyrinth rubber ring 22

3. Remove Ball bearing 627DDW with 1R269.

1R269

Ball bearing 627DDW

4.Remove Flat washer 7 and Insulation washer.

Flat washer 7

Insulation washer

(1) Assemble the commutator end of Armature as drawn in Fig. 4.

Note: This step is required for the models with electronic control system of GA4041C, GA4043C, GA4541C, GA4543C, GA5041C, GA5043C.

Fig. 4

1. Return tabs of Self lock 6 to their	2. Press down Self lock 6 until	3. Magnet sleeve is stabilized
normal shape before assembling.	Wave washer 6 gets flat.	between Self lock 6 and
Then, mount Wave washer 6 to		Wave washer 6 by the reaction
Then, mount Wave washer 6 to		Wave washer 6 by the reaction
the commutator end of Armature.		force of Wave washer 6.

Note: Be careful of their directions.	Self lock 6
Refer to the drawings in Fig. 4.	Self lock 6
	Magnet sleeve
Self lock 6
Magnet sleeve
Wave washer 6	Wave washer 6
Wave washer 6