P 5/ 14
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Armature, Spiral bevel gear [small one] (cont.)
ASSEMBLING
(2)Assemble the drive end of Armature as drawn in Fig. 5.
Fig. 5
1. Set Brake shoe holder | 2. Mount Gear housing cover to |
complete and Compression | Armature to fit the groove of |
spring 33 to Armature. | the cover to Compression |
| spring 33 and Armature shaft |
Compression | through Ball bearing 6001LLB. |
spring 33 | Ball bearing |
| |
Brake shoe | Groove of Gear | ||
6001LLB | |||
holder complete |
| housing cover |
Armature | Compression |
spring 33 |
3.Supporting Armature section with 2 pcs. of 1R258, press Gear housing cover to Armature section with 1R028.
1R028
1R258
4.Set Spiral bevel gear (small) and Flat washer 6 to Armature shaft. Then, secure them with M6 Hex nut.
Flat washer 6 | M6 Hex nut | |
| ||
Spiral bevel | Wrench 10 | |
gear (small) | ||
|