Makita GA5043C, GA4043C, GA4543C, GA4541C, GA4041C, GA5041C dimensions Disassembly/Assembly

Page 6

P 6/ 14

Repair

[3] DISASSEMBLY/ASSEMBLY

[3] -2. Armature, Spiral bevel gear [small one] (cont.)

ASSEMBLING

(3)Assemble Spacer, Armature section and Gear housing to Motor housing as drawn in Fig. 6.

Fig. 6

1.Set Switch knob to “Lock ON” position so that Switch plate is pushed toward Spacer. Then, mount Spacer while fitting its groove to Switch plate.

And then, return Switch knob to “OFF” position.

Spacer

Switch plate Switch knob

groove

2.Assemble Armature section to Motor housing while fitting the wings of Brake shoe complete to the grooves of Spacer.

Wing of

Brake shoe complete

Groove of Spacer

Wing of

Brake shoe complete

3.Face the notch to the same side as Name plate by twisting Gear housing cover.

Gear housing cover

Name plate

Spacer

Notch on

Gear housing cover

4.Assemble Gear housing while facing Spindle to the same side as the notch and Name plate.

Spindle

Notch on Gear housing Gear housing cover

Name plate

Image 6
Contents Specification Optional accessoriesStandard equipment Repair TeethArmature, Spiral bevel gear small one DisassemblingAssembling Ball bearing DISASSEMBLY/ASSEMBLY Spiral bevel gear large one, Ball bearings 696ZZ/ 6201DDW 1R258 Three Bond Loctite Switch Lever Switch Block SwitchBrush Holder Shaft Lock Circuit diagram ControllerWiring diagram Fig. D-2