![](/images/new-backgrounds/1142285/14228523x1.webp)
Chapter 1 Overview
Chapter Organization
Chapter 7, “Building the Second Row Table Assembly”
•This chapter describes how to build the second row table and is organized the same as Chapter 2.
Chapter 8, “Assembling the Remaining Cisco TelePresence Elements”
•This chapter is organized the same as Chapter 2.
•Each element is described using one or more illustrations. The elements are:
–Camera
–Front row table leg wiring
–Projector
–Codec and Audio/Video Expansion Unit
–Speaker
–Projector Screen
–Cisco Unified IP Phone
–Camera Target
Chapter 9, “Routing Power and Signal Cables”
•A series of illustrations are used to describe the routing and connection of power and signal cables for the front row and the display assembly area.
•Illustrations show you the routing path to take for all cables.
•Illustrations showing cables terminating in a Codec include a
Chapter 10,
•This chapter describes the configuration you perform to set up your Cisco TelePresence System 3200 for the first time.
Chapter 11, “Use & Care Guide”
•This chapter provides information on maintaining several elements of the Cisco TelePresence System 3200, including the tabletop and plasma displays.
Chapter 12, “Field-Replaceable Unit Guide”
•This chapter describes removal and replacement processes for various elements of the Cisco TelePresence System 3200.
Appendix A: Parts List Sorted by Carton
•This appendix lists all parts included in the individual chapter parts lists, and sorts the list by carton.
Appendix B: Region- and Country-Specific Equipment
•This appendix lists the part numbers for all region- and
Figure 1-1 View of an Assembled Cisco TelePresence System 3200, Standard Configuration
Step 1 Install and connect the camera assembly. See Step 1 and Step 2 in Chapter 8, “Assembling the Remaining Cisco TelePresence Elements” to install the camera assembly and Step 14 in Chapter 9, “Routing Power and Signal Cables” to connect the camera cables.
Cisco TelePresence System 3200
| ||
|