Cisco Systems 3200 manual Left Table segment

Chapter 6 Building the First Row Table Assembly

Parts List

Step 10 Attach the left Table segment.

a.The draw bolts have two halves that screw into a center piece.

b.While a draw bolt is being tightened, hold the table edges together to avoid damage to the draw bolt or the table segment.

c.Tighten the draw bolts so the two table segments are connected snugly.

d.While one person is tightening the draw bolts from below, it is important for the support person to maintain the alignment of the table segment edges.

Figure 6-10 Left Table segment

7

6

12

10

204142

Note The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top.

	Cisco TelePresence System 3200
6-12	OL-14521-01