6-8
Cisco TelePresence System 3200
OL-14521-01
Chapter 6 Building the First Row Table Assembly
Parts List
Step 6 Attach the right Table segment.
a. Make sure you tighten the draw bolt evenly on both sides.
b. While a draw bolt is being tightened, hold the table edges together to avoid damage to t he draw bolt
or the table segment.
c. Tighten the draw bolt so the two table segments are connected snugly.
d. While one person is tightening the draw bolt from below, it is important for the support person to
maintain the alignment of the table segment edges.
Figure 6-6 Right Table segment
Note The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top.
5
12
4
204138
10
30
9