Maintenance

EN G L IS H

WARNING: ALWAYS wear working gloves while operating this tool.

WARNING: The gear case becomes very hot during use.

WARNING:

•Ensure all materials to be ground are secured in place.

•Apply only a gentle pressure to the tool. Do not exert side pressure on the disc.

•Avoid overloading. Should the tool become hot, let it run a few minutes under no load condition.

Proper Hand Position (ﬁg. 1, 7)

WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown.

WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction.

Proper hand position requires one hand on the side handle (d), with the other hand on the body of the tool, as shown in figure 7.

To avoid build-up of metal swarf inside the machine, we recommend to clear the ventilation slots on a daily basis. See Maintenance.

Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories. Before reconnecting the tool, depress and release the trigger switch to ensure that the tool is off.

Pop-off Brushes

The motor will be automatically shut off indicating that the carbon brushes are nearly worn out and that the tool needs servicing. The carbon brushes are not user-serviceable. Take the tool to an authorised DEWALT repair agent.

Switching On and Off (ﬁg. 1)

WARNING: Before using the tool, check that the handle is tightened securely.

To run the tool first actuate the switch release button

(b) and then press the on/off switch (a).

For continuous operation hold the trigger switch (a) down.

To stop the tool, release the on/off switch.

WARNING: Do not switch the tool on or off when under load.

Metal Applications

When using the tool in metal applications, make sure that a residual current device (RCD) has been inserted to avoid residual risks caused by metal swarf.

If the power supply is shut off by the RCD, take the tool to authorised DEWALT repair agent.

WARNING: In extreme working conditions, conductive dust can accumulate inside the machine housing when working with metal. This can result in the protective insulation in the machine becoming degraded with a potential risk of an electrical shock.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

DW882 specifications

The DeWalt DW882 is a high-performance angle grinder designed for professional contractors and DIY enthusiasts alike. Known for its powerful motor and robust construction, the DW882 offers versatility in a variety of grinding and cutting tasks. One of the standout features of this tool is its 4.5-inch wheel capacity, which allows for efficient operation in a multitude of applications, from metalworking to masonry.

At the heart of the DW882 lies a 12-amp motor that generates a no-load speed of 11,000 RPM. This powerful motor ensures that users can tackle tough materials with ease, providing consistent power for grinding, cutting, and polishing tasks. The high-speed operation not only improves efficiency but also enhances the tool’s ability to cut through materials quickly and smoothly.

The DW882 is equipped with an adjustable guard, allowing for customization based on the workpiece and task at hand. This feature adds an additional layer of safety, ensuring that sparks and debris are directed away from the user. Additionally, the grinder has a comfort grip, which provides better handling and control, reducing user fatigue during prolonged use.

Another key characteristic of the DeWalt DW882 is its durable construction. Built with high-quality materials, this angle grinder is designed to withstand heavy usage in demanding environments. The tool features a sealed and protected motor that helps prevent dust and debris from entering and causing damage, thereby extending its lifespan.

Moreover, the DW882 incorporates DeWalt's sophisticated safety mechanisms. A paddle switch with a lock-on function ensures that the grinder operates only when intended, reducing the risk of accidental start-ups. The anti-vibration design further enhances user comfort by minimizing vibrations transferred to the hands and arms during operation.

The versatility of the DW882 is enhanced by its compatibility with a wide range of accessories, such as cutting wheels, brushes, and grinding discs. This makes it an ideal choice for various applications, whether it's cutting rebar, grinding welds, or prepping surfaces for painting.

In summary, the DeWalt DW882 stands out as a powerful and reliable angle grinder tailored for both professional and personal use. With its robust motor, adjustable guard, durable construction, and safety features, it is engineered to perform efficiently across a diverse range of tasks, making it a valuable addition to any tool collection.