Additional Specific Safety Rules, Service

EN G L IS H

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4)POWER TOOL USE AND CARE

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the

working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)SERVICE

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

ADDITIONAL SPECIFIC SAFETY RULES

Safety Instructions for All Operations

a)This power tool is intended to function as a grinder. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

b)Operations such as sanding, wire brushing, polishing and cutting-off are not recommended to be performed with this power tool. Operations for which the power tool was not designed may create a hazard and cause personal injury.

c)Do not use accessories which are not specifically designed and recommended by the tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation.

d)The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart.

e)The outside diameter and the thickness of your accessory must be within the capacity rating of your power tool. Incorrectly sized accessories cannon be adequately guarded or controlled.

f)The arbour size of wheels, flanges, backing pads or any other accessory must properly fit the spindle of the power tool. Accessories with arbour holes that do not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control.

g)Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheel for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory.

DW882 specifications

The DeWalt DW882 is a high-performance angle grinder designed for professional contractors and DIY enthusiasts alike. Known for its powerful motor and robust construction, the DW882 offers versatility in a variety of grinding and cutting tasks. One of the standout features of this tool is its 4.5-inch wheel capacity, which allows for efficient operation in a multitude of applications, from metalworking to masonry.

At the heart of the DW882 lies a 12-amp motor that generates a no-load speed of 11,000 RPM. This powerful motor ensures that users can tackle tough materials with ease, providing consistent power for grinding, cutting, and polishing tasks. The high-speed operation not only improves efficiency but also enhances the tool’s ability to cut through materials quickly and smoothly.

The DW882 is equipped with an adjustable guard, allowing for customization based on the workpiece and task at hand. This feature adds an additional layer of safety, ensuring that sparks and debris are directed away from the user. Additionally, the grinder has a comfort grip, which provides better handling and control, reducing user fatigue during prolonged use.

Another key characteristic of the DeWalt DW882 is its durable construction. Built with high-quality materials, this angle grinder is designed to withstand heavy usage in demanding environments. The tool features a sealed and protected motor that helps prevent dust and debris from entering and causing damage, thereby extending its lifespan.

Moreover, the DW882 incorporates DeWalt's sophisticated safety mechanisms. A paddle switch with a lock-on function ensures that the grinder operates only when intended, reducing the risk of accidental start-ups. The anti-vibration design further enhances user comfort by minimizing vibrations transferred to the hands and arms during operation.

The versatility of the DW882 is enhanced by its compatibility with a wide range of accessories, such as cutting wheels, brushes, and grinding discs. This makes it an ideal choice for various applications, whether it's cutting rebar, grinding welds, or prepping surfaces for painting.

In summary, the DeWalt DW882 stands out as a powerful and reliable angle grinder tailored for both professional and personal use. With its robust motor, adjustable guard, durable construction, and safety features, it is engineered to perform efficiently across a diverse range of tasks, making it a valuable addition to any tool collection.