Assembly and Adjustments, Operation | DeWalt DW882 instruction

EN G L I S H

Electrical Safety

The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate.

Machine is grounded (class I) in accordance with EN 60745, therefore earth connection is required.

If the supply cord is damaged, it must be replaced by a specially prepared cord available through the DEWALT service organization.

Mains Plug Replacement (U.K. & Ireland Only)

If a new mains plug needs to be fitted:

•Safely dispose of the old plug.

•Connect the brown lead to the live terminal in the plug.

•Connect the blue lead to the neutral terminal.

WARNING: Connect the yellow/green lead to the earth terminal.

Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved 3–core extension cable suitable for the power input of this tool (see technical data). The minimum conductor size is 1.5 mm2; the maximum length is 30 m.

When using a cable reel, always unwind the cable completely.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories. Before reconnecting the tool, depress and release the trigger switch to ensure that the tool is off.

Attaching the Side Handle (ﬁg. 4)

WARNING: Before using the tool, check that the handle is tightened securely.

Screw the front handle (c) tightly into the hole (l) Instructions for use.

Mounting an Grinding Disc (ﬁg. 2)

1.Slacken the wing nuts (e) and swivel the bolts (f) to release the cover (g).

2.Open the cover.

3.Hold the spindle by inserting the Allen key into one of the holes in the inner flange.

4.Loosen the nut (h) using the spanner. Remove the nut and the outer flange (i).

5.Mount the accessory (j) on the spindle.

6.Replace the flange and securely tighten the nut.

7.Close the cover and lock it by tightening the wingnuts.

To remove the accessory, proceed in reverse order.

Mounting and Removing the Guard (ﬁg. 3)

1.Remove the accessory as described above.

2.Loosen the bolts (k).

3.Slide the guard onto the tool as shown.

4.Securely tighten the bolts.

To remove the guard, proceed in reverse order.

Never operate the tool without the guard, except when polishing using a cloth disc.

Prior to Operation

•Install the guard and appropriate disc or wheel. Do not use excessively worn discs or wheels.

•Be sure the inner and outer flange are mounted correctly.

•Make sure the disc or wheel rotates in the direction of the arrows on the accessory and the tool.

OPERATION

Instructions for Use

WARNING: Always observe the safety instructions and applicable regulations.

DW882 specifications

The DeWalt DW882 is a high-performance angle grinder designed for professional contractors and DIY enthusiasts alike. Known for its powerful motor and robust construction, the DW882 offers versatility in a variety of grinding and cutting tasks. One of the standout features of this tool is its 4.5-inch wheel capacity, which allows for efficient operation in a multitude of applications, from metalworking to masonry.

At the heart of the DW882 lies a 12-amp motor that generates a no-load speed of 11,000 RPM. This powerful motor ensures that users can tackle tough materials with ease, providing consistent power for grinding, cutting, and polishing tasks. The high-speed operation not only improves efficiency but also enhances the tool’s ability to cut through materials quickly and smoothly.

The DW882 is equipped with an adjustable guard, allowing for customization based on the workpiece and task at hand. This feature adds an additional layer of safety, ensuring that sparks and debris are directed away from the user. Additionally, the grinder has a comfort grip, which provides better handling and control, reducing user fatigue during prolonged use.

Another key characteristic of the DeWalt DW882 is its durable construction. Built with high-quality materials, this angle grinder is designed to withstand heavy usage in demanding environments. The tool features a sealed and protected motor that helps prevent dust and debris from entering and causing damage, thereby extending its lifespan.

Moreover, the DW882 incorporates DeWalt's sophisticated safety mechanisms. A paddle switch with a lock-on function ensures that the grinder operates only when intended, reducing the risk of accidental start-ups. The anti-vibration design further enhances user comfort by minimizing vibrations transferred to the hands and arms during operation.

The versatility of the DW882 is enhanced by its compatibility with a wide range of accessories, such as cutting wheels, brushes, and grinding discs. This makes it an ideal choice for various applications, whether it's cutting rebar, grinding welds, or prepping surfaces for painting.

In summary, the DeWalt DW882 stands out as a powerful and reliable angle grinder tailored for both professional and personal use. With its robust motor, adjustable guard, durable construction, and safety features, it is engineered to perform efficiently across a diverse range of tasks, making it a valuable addition to any tool collection.