ASSEMBLY
CONNECT SHIFT ROD (See Fig. 6)
•Insert end of shift rod farthest from bend into hole of shift lever indicator,
•Insert hairpin clip through hole of shift rodto secure,
•Insertother end of shift rod _ntohole in shift lever,
,Insert second hairpin clip through hole of shift rod.
ATTACH THIS END | AI"TACH THIS | |
TO SHIFT LEVER | END TO SHIFT | |
INDICATOR |
| LEVER _,,1 |
........ | ..................... |
|
|
| SHIFT ROD |
SHIFT | HAIRPIN | SHIFT |
| CLIP | LEVER |
INDICh;TOR
HAIRPIN CLIP
SHIFT ROD
FIG, 6
REMOVE TILLER FROM CRATE
•Make sure shift lever indicator ts in "N" (neutral) posi- tion (See Fig, 6)
•Tilt tiller forward by Iiftirlg handie_ Separate cardboard cover from leveling shield.
•Rotate tiller handle to the right and pull tiller out of carton,
INSERT CABLE CLIP (See Fig. 7)
•Insert plasticcable clip intohole on the back of handle column. Push cables into clip.
CABLES
'CABLE CLIP
FIG. 7
CHECK TIRE PRESSURE
The tires on your unit were ovednflated at the factory for shipping purposes, Correct and equal tire pressure is importantfor best tilling performance.
•Reduce tire pressure to 20 PSt.
HANDLE HEIGHT
•Hand!eheight may be adjusted to better suitoperator. (See TO ADJUST HANDLE HEIGHT' in the Service and Adjustments section of this manual).
8