Craftsman 917-299751 Operation, How To Use Your Tiller, Reverse - Wheels Only/Tines Stopped

Models: 917-299751

1 32
Download 32 pages 26.28 Kb
Page 10
Image 10
OPERATION

OPERATION

The operation of any tiller can result In foreign oblects thrown Into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling° We recommend wide vision safety mask for over the spectacles or standard safety glasses,

HOW TO USE YOUR TILLER

Know how to operate all controls before adding fuel and oil or attempting to start engine.

STOPPING (See Fig. 9)

TINES AND DRIVE

Release drive control bar to stop movement.

Move shift lever to "N" (neutral) position.

ENGINE

Move throttle control to "STOP" position,

Never use choke to stop engine.

DRIVE CONTROL BAR "ENGAGED" POSITION

,SHIFT LEVER

DRIVE CONTROL BAR "DISENGAGED" POSITION

FIG. 9

TINE OPERATION - WITH WHEEL DRIVE

A_ways release drive control bar'before moving shift lever into another position.

Tine movement is achieved by moving shift lever to "T" (till) position and engaging drive control bar_

FORWARD - WHEELS ON LYiTINES STOPPED

Release drive control bar and move shift leverindicator to "F" (forward) position. Engage drive control bar and tiller will move forward_

REVERSE - WHEELS ONLY/TINES STOPPED

DO NOT STAND DIRECTLY BEHIND TILLER.

Release the drive control bar.

Move thJ:ottlecontrol to "SLOW" position.

. Move shift lever indicator to "R" (reverse) position°

°Hold drive control bar against the handle to start tiller movement.

DEPTH STAKE (See Fig. 10)

The depth stake canbe raised or toweredto aUowyou more versatile tilling and cultivating, or to more easily transport your tiller°

/......

SHALLOWESTPOSITION TILLING

TILLING

STAKE

DEPTH-_

FIG. 10

TILLING (See Fig. 11)

Release depth stake pin. Pull the depth stake up for increased tilling depth, Place depth stake pin in hole of depth stake to lock in position°

Place shift lever indicator in 'T' position.

°Hold the drive control bar against the handle to start tilling movement. Tines and wheels will both turn.

Move throttle control to"FAST" position for deeptilling, To cultivate, throttle control can be set at any desired

speed, depending on how fast or slow you wish to cultivate.

DEPTH STAKE PiN

"RELEASED" POSITION

\

"LOCKED"

POSITION

OUTERNUT "B"

SIDE SHIELD

FIG. 11

10

Page 10
Image 10
Craftsman 917-299751 Operation, How To Use Your Tiller, Reverse - Wheels Only/Tines Stopped, DEPTH STAKE See Fig