USER-MAINTENANCE
INSTRUCTIONS
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Turn off the tool, detach the air supply, safely discharge any residual air pressure in the tool before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise, vibration, or air leaking occurs, have the problem corrected before further use.
TO PREVENT EXPLOSION: Lubricate the tool only with specified lubricants. Lubricate the air inlet using only pneumatic tool oil. Lubricate the internal mechanism using only white lithium grease. Other lubricants may damage the mechanism and may be highly flammable, causing an explosion.
Cleaning and Maintenance
Note: These procedures are in addition to the regular checks and maintenance
explained as part of the regular op- eration of the
1.Daily - Air Supply Maintenance: Every day, perform maintenance on the air supply according to the com- ponent manufacturers’ instructions. Maintenance on the air supply will allow the tool to operate more safely and will also reduce wear on the tool. Any disassembly and cleaning should be done only by a qualified techni- cian.
2.Wipe and brush grinder off after each use. keep the unit dry and keep the space at either end of the knob free of oil, grease and wood or metal chips.
3.Ensure that the Front Cover (20), Sleeve (19) and Rear End Holder are tightly secured so that air will not escape.
4.Ensure the hose couplings or con- nectors have air tight connections.
SKU 97870 | For technical questions, please call | Page 12 |