FUNCTIONAL DESCRIPTION
Specifications
Exhaust Position | Frontal Exhaust | |
On/Off Method | ||
Air Inlet | 1/4" | |
coupler) | ||
| ||
Maximum Speed* | 25,000 RPM | |
Air Consumption | 2 CFM @ 90 PSI | |
Collet Size | 1/8" |
*Maximum speed at stated maximum air pressure. Ex- cess air pressure is hazardous and may cause the tool to exceed stated maximum speed.
INITIAL TOOL SET UP/
ASSEMBLY
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown throughout the manual as soon as possible.
•This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up.
Air Supply
TO PREVENT
EXPLOSION:
Use only clean, dry, regulated, compressed air to power this tool. Do not use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
| Male | Male |
| Connector | Connector |
Tool |
|
|
| Quick | Air Hose |
| Coupler | |
|
| on Reel |
Valve | Oiler | Filter |
|
| Air |
|
| Compressor |
Quick |
|
|
Coupler | Regulator with | |
| ||
| Pressure Gauge | |
Recommended Air Line Components | ||
1.Incorporate an
Note: If an automatic oiler system is not used, add a few drops of Pneumatic Tool Oil to the airline connection be- fore operation. Add a few more drops after each hour of continual use.
2. Attach an air hose to the compres- sor’s air outlet. Connect the air hose to the air inlet of the tool. Other com-
REV 08j
SKU 97870 | For technical questions, please call | Page 8 |