MAINTENANCE
Your Die Grinder is best operated with an Airline Oiler. If you are using the Die Grinder without an Airline Oiler, follow the steps below for maintenance.
1.Disconnect the Die Grinder from the air hose.
2.Apply a few drops of PNEUMATIC TOOL OIL through the HOSE ADAPTER (1) be- fore each use, or every hour if used con- tinuously.
3.Apply a few drops of oil to the LEVER (4) as shown in Figure 6. Work the LEVER a few times to lubricate.
Hose Adapter (1)
Lever (4)
Figure 6 — Lubrication Points
SKU 93088 | For technical questions, please call | Page 9 |