20.WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•Lead from
•Crystalline silica from bricks and cement or other masonry products
•Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.)
UNPACKING
When unpacking your Angle Die Grinder, check the items against the list below. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.
Item | Description | Qty |
N/A | Die Grinder Assembly | 1 |
N/A | Wrench | 2 |
31 | Collet | 1 |
32 | Collet Nut | 1 |
Grinding Attachment Installation
1.Select the Grinding Attachment appropriate for your needs.
2.Select the COLLET (31) that has the same diameter as the Grinding Attachment. The diameter will be either ¼” or 1/8”.
Collet Nut (32)
Figure 1 — Inserting the Collet
3.Insert the COLLET into the COLLET NUT (32) as shown in Figure 1.
4.Thread the COLLET NUT onto the CHUCK CASING (29) a few turns.
REV 08e; 08g
SKU 93088 | For technical questions, please call | Page 4 |