Harbor Freight Tools 95504 Specifications, Save This Manual, Safety Warnings and Precautions

Page 2

Specifications

ITEM

DESCRIPTION

Overall Dimensions

7-1/2” L x 5” W x 3-3/4” H

Handle Dimensions

1”Dia. x 3-1/8”L (left side only)

Inlet Size

1/4” - 18 NPT Female thread

 

Max. Rated Air Pressure

90 PSI

 

Air Consumption

6 CFM @90 PSI

 

Maximum Speed

10,000 RPM

Wheel Material

Resin bonded aluminum oxide grit

 

Wheel Dimensions

4” Diameter x 1/4”Thickness

 

Arbor Diameter

5/8”

 

Spindle Thread

3/8”

 

Net Weight

2.65 Lbs.

 

 

 

 

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.

3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.

4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5.Do not force tool. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool capacity.

SKU 95504

Page 2

07i

Image 2
Contents AIR Angle Grinder Save This Manual SpecificationsSafety Warnings and Precautions Page Special Warnings for This Tool Unpacking Air ConnectionAttaching/Changing Wheel Accessory OperationMaintenance and Troubleshooting Please Read the Following CarefullyAssembly Drawing Parts ListLimited 90 DAY Warranty