Harbor Freight Tools 95504 operating instructions Unpacking, Air Connection

Page 5

2.All accessories must be rated for at least the RPM speed recommended on the tool's warning label. Wheels and other accessories running over rated speed can fly apart and cause injury.

3.For safest operation, it is recommended that only these accessories be used with this product: Abrasive Cut-Off Discs and Wheels, Flap Wheels, Wire Brushes, Wire Wheel Brushes.

4.Always use an approved and proper guard when using the above mentioned accessories. Each accessory must have the correct arbor size and must fit properly on the Gear Shaft. Make sure accessories are tightened down securely.

5.Always disconnect from power source before adding or removing accessories. Use a cloth or glove to protect hands from abrasion.

6.The Handle must be used at all times to maintain complete control of the tool. Two-handed operation is required at all times.

WARNING: Never install a carbide tipped or steel circular saw blade for use with this Angle Grinder! Never install a wood carving blade, carving disc with saw chain cutters, or a cutting carving disc on this Angle Grinder!

Unpacking

When unpacking, check to make all parts listed on Page 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.

Angle

Grinder

Air Connection

Note: Air Compressor is not supplied. You will need an Air Compressor with a minimum rating of One Horsepower, 6 CFM delivery at 90 PSI, and a 12 Gallon Air Tank.

You may use Couplings (not supplied) as shown in the Diagram above. Do not connect Couplers directly to the Air Inlet. Doing so will increase the overall bulk of the tool and strain the Inlet Threads.

SKU 95504

Page 5

Image 5
Contents AIR Angle Grinder Save This Manual SpecificationsSafety Warnings and Precautions Page Special Warnings for This Tool Air Connection UnpackingOperation Attaching/Changing Wheel AccessoryPlease Read the Following Carefully Maintenance and TroubleshootingParts List Assembly DrawingLimited 90 DAY Warranty