3.Place the two tool clamps on the top of the pivot plate as shown in Figure 3. Attach using the tool clamp knobs and washers on top and the special lock nuts underneath the pivot plate.
4.Position the clamps so they are centered over the wheel, and adjust the width to the approximate size of the workpiece you are sharpening. See Section 5: Operations, Narrow Knives for further information on the grinding process.
NOTES
Knife Blade
Adjuster
Slider
Assembly
Pivot Plate
Adjuster
Wheel Height
Lock
ON/OFF
Switch
Knife Blade
Clamp
Figure 4. Universal Knife Grinder controls.
Grinder Height
Handwheel
Fence
Table
Grinding Wheel
Work
Plate
Work Plate
Adjuster
Pivot Plate
Adjuster
G2790 Universal Knife Grinder |