INTRODUCTION
Foreword
The specifications, details, and photographs in this manual represent the Model H8216 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly.
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
| Specifications | |
Collet Size | 1⁄4" | |
No Load Speed | 20,000 RPM | |
Air Consumption | 3 CFM | |
Air Inlet | 1⁄4" | |
Required PSI | 90 PSI | |
Maximum Sound Level | 94 dB | |
| Inventory |
|
H8216 Inventory | Qty | |
A. | Machine Oil Bottle | 1 |
B. | 1/4" Angle Die Grinder | 1 |
C. 1/4" NPT Male Quick Connect Fitting..1 | ||
D. | Wrench 12mm | 1 |
E. | Wrench 17mm | 1 |
| A | B |
EC
D
Figure 1. Model H8216 Inventory.
Model H8216 1/4" Angle Die Grinder |