Grizzly T23096 owner manual

Page 2

This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators.

Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to proper installation in a safe environment, personnel training and usage authorization, proper inspection and maintenance, manual availability and compre- hension, application of safety devices, cutting/sanding/grinding tool integrity, and the usage of personal protective equipment.

The manufacturer will not be held liable for injury or property damage from negligence, improper training, machine modifications or misuse.

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints.

Crystalline silica from bricks, cement and other masonry products.

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: Work in a well ventilated area, and work with approved safety equip- ment, such as those dust masks that are specially designed to filter out microscopic particles.

Image 2
Contents Industrial 1⁄4 DIE Grinder Page Table of Contents Before Operating This Equipment SafetySafety Instructions for Pneumatic Tools Mation about proper operation of the equipmentAdditional Safety Instructions for Pneumatic Die Grinders Foreword Contact Info SpecificationsIntroduction Identification Air supply setup tips SetupUnpackingAssembly InventoryTo complete a typical cutting or grinding operation OperationsOperation Overview T20887 T20881 G6261 AccessoriesG8210-50-Pc. Stone Set H3105-Clamp Style Magnifying Lamp G7870 G7872 G7871 G7866 T21767G7867Periodically as required MaintenanceBefore and after each use Service TroubleshootingPort Model T23096 Industrial 1⁄4 Die Grinder Main Parts Diagram Main Parts List PartsWarranty