Grizzly H8125 instruction manual Operations, Charging the Battery, To charge the battery

Page 11

SECTION 4: OPERATIONS

Read the manual before operation. Become familiar with this machine, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not under- stood or followed.

Charging the Battery

To prevent potential problems during ship- ment, batteries are usually shipped with little or no charge. You must charge your new batteries before initial use.

Note: The time to fully charge a battery is approximately 3–31⁄2hours.

To charge the battery:

1.Make sure the AC/DC adapter is not connected to a power supply.

2.Connect the battery charger to the AC/ DC adapter.

3.Press the two side tabs on the battery and slide the battery from the grinder.

4. Position the flat part of the battery bot- tom to the front of the charger, align the metal contacts on the battery with the metal flanges in the battery pack, then firmly press the battery into the charger.

5.Plug the AC/DC adapter into a 110- 120V power outlet—the green light on the charger will turn ON.

Note: DO NOT leave the battery in the energized charger indefinitely. The charger will NOT turn OFF automati- cally.

6.After 3–31⁄2hours in the energized char- ger, the battery will be fully charged. Remove the battery from the charger and unplug the AC/DC adapter.

Make sure the grinder switch is turned all the way to the right and

is in the "0" (OFF) position before installing the battery. Failure to heed this warning could result in serious personal injury.

To install the battery:

1.Align the arrows on the battery with the arrows on the grinder base.

2.Press the battery into the grinder until it snaps into place.

Model H8125 9.6V Mini Grinder Kit

-9-

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model H8125 6V Mini Grinder KIT With Flex Shaft Page Table of Contents Before Operating This Equipment SafetySafety Instructions for Machinery Model H8125 9.6V Mini Grinder Kit Additional Safety Instructions for Mini Grinder Additional Safety Instructions for Batteries and Chargers Foreword Contact Information IntroductionMachine Data SET UPUnpacking Inventory Operations Charging the BatteryTo charge the battery To install and use the LED Light Attachment Using the LED Light AttachmentInstalling Bits To use the grinder Using the GrinderHigher Speed Uses Lower Speed UsesTo install the flex shaft Installing the Flex ShaftChanging LED Light Attachment Batteries MaintenanceDaily Maintenance LubricationDescription Parts BreakdownWarranty and Returns Page Warranty Card BOX BELLINGHAM, WA Send a Grizzly Catalog to a friendName Street CityStateZip

H8125 specifications

The Grizzly H8125 is a versatile and robust woodworking machine designed to meet the demands of both amateur and professional woodworkers. Known for its reliability and performance, the H8125 is a dedicated benchtop planer, ideal for those who require precision when flattening and dimensioning boards.

One of the standout features of the Grizzly H8125 is its powerful 15-amp motor, which provides ample power to handle a wide variety of hardwoods and softwoods. This motor ensures that the machine can maintain a consistent feed rate, allowing for smooth and even material removal. Users can expect to achieve a maximum cutting depth of 1/8 inch per pass, which is useful for effectively reducing board thickness to desired specifications.

The H8125 showcases a table size of 20 inches by 10 inches, providing ample support for larger workpieces while maintaining a compact footprint ideal for smaller workshops. The precision-machined aluminum table enhances the overall stability and flatness of the working surface, ensuring accurate results every time.

In terms of technology, the H8125 features a dual-blade cutter head that utilizes high-speed steel knives. This design not only increases cutting efficiency but also ensures a clean finish on the workpieces. The replaceable knives are easily accessible, allowing for quick and efficient maintenance, which contributes to overall productivity.

Additionally, the Grizzly H8125 is equipped with an adjustable depth control system, enabling users to make precise adjustments according to their specific requirements. The easy-to-read scale helps in setting exact depth settings, facilitating repeatable results.

Another notable characteristic of this machine is its integrated dust collection system. The H8125 comes with a dust port that can be connected to standard dust extraction systems, ensuring that the workspace remains clean and free from debris during operation. This feature not only enhances visibility but also promotes a safer working environment.

Overall, the Grizzly H8125 is a highly functional and reliable benchtop planer that combines power, versatility, and ease of use. Its suite of features makes it an ideal choice for woodworkers who prioritize accuracy and efficiency in their projects. Whether for hobbyist use or professional applications, the H8125 stands as a solid investment for anyone looking to elevate their woodworking capabilities.
Top Page Image Contents