Grizzly H8125 Using the Grinder, Higher Speed Uses, Lower Speed Uses, To use the grinder

Page 13

3.Insert at least 1⁄2" of the bit into the collet.

4.Hand tighten the collet nut while depressing the collet lock. Then, use the collet wrench to tighten the collet nut an additional 1⁄3 turn.

Failure to wear ANSI approved safety glasses while operating the grinder could cause serious personal eye injury.

Using the Grinder

Most operations performed with the Model H8125 will give the best results at higher speeds. However, slower speeds are ideal when working with plastics or other materi- als that melt easily.

Always test the bit and speed combination on a scrap piece of material similar to the workpiece. Trail and error is the best way to determine the ideal setup.

To use the grinder:

1.Make sure the battery is charged and properly inserted into the grinder.

2.Grasp the grinder with a secure grip.

3.Turn the grinder ON by rotating the speed dial from "0" to the desired speed setting.

4.Using light pressure, ease the working end of the bit against the workpiece.

5.To turn the grinder OFF, rotate the speed dial to "0".

Higher Speed Uses

Higher speeds are best for general carv- ing, cutting, routing, and grinding. The bit removes material quicker at higher speeds.

Lower Speed Uses

Lower speeds are best for grinding and cutting materials that have low melting points. Plastics, in particular, often melt from the heat of friction generated at high- er speeds. Lower speeds are also best for polishing and buffing when using the felt accessories included.

Use lower speed settings to reduce friction when working with plastics or other materials with low melt- ing points. Some materials can liq- uefy from the heat of friction and be thrown into operator, causing per- sonal injury.

Model H8125 9.6V Mini Grinder Kit

-11-

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model H8125 6V Mini Grinder KIT With Flex Shaft Page Table of Contents Safety Instructions for Machinery SafetyBefore Operating This Equipment Model H8125 9.6V Mini Grinder Kit Additional Safety Instructions for Mini Grinder Additional Safety Instructions for Batteries and Chargers Foreword Contact Information IntroductionUnpacking SET UPMachine Data Inventory To charge the battery Charging the BatteryOperations Installing Bits Using the LED Light AttachmentTo install and use the LED Light Attachment Higher Speed Uses Using the GrinderLower Speed Uses To use the grinderTo install the flex shaft Installing the Flex ShaftDaily Maintenance MaintenanceLubrication Changing LED Light Attachment BatteriesDescription Parts BreakdownWarranty and Returns Page Warranty Card Name Street CityStateZip Send a Grizzly Catalog to a friendBOX BELLINGHAM, WA

H8125 specifications

The Grizzly H8125 is a versatile and robust woodworking machine designed to meet the demands of both amateur and professional woodworkers. Known for its reliability and performance, the H8125 is a dedicated benchtop planer, ideal for those who require precision when flattening and dimensioning boards.

One of the standout features of the Grizzly H8125 is its powerful 15-amp motor, which provides ample power to handle a wide variety of hardwoods and softwoods. This motor ensures that the machine can maintain a consistent feed rate, allowing for smooth and even material removal. Users can expect to achieve a maximum cutting depth of 1/8 inch per pass, which is useful for effectively reducing board thickness to desired specifications.

The H8125 showcases a table size of 20 inches by 10 inches, providing ample support for larger workpieces while maintaining a compact footprint ideal for smaller workshops. The precision-machined aluminum table enhances the overall stability and flatness of the working surface, ensuring accurate results every time.

In terms of technology, the H8125 features a dual-blade cutter head that utilizes high-speed steel knives. This design not only increases cutting efficiency but also ensures a clean finish on the workpieces. The replaceable knives are easily accessible, allowing for quick and efficient maintenance, which contributes to overall productivity.

Additionally, the Grizzly H8125 is equipped with an adjustable depth control system, enabling users to make precise adjustments according to their specific requirements. The easy-to-read scale helps in setting exact depth settings, facilitating repeatable results.

Another notable characteristic of this machine is its integrated dust collection system. The H8125 comes with a dust port that can be connected to standard dust extraction systems, ensuring that the workspace remains clean and free from debris during operation. This feature not only enhances visibility but also promotes a safer working environment.

Overall, the Grizzly H8125 is a highly functional and reliable benchtop planer that combines power, versatility, and ease of use. Its suite of features makes it an ideal choice for woodworkers who prioritize accuracy and efficiency in their projects. Whether for hobbyist use or professional applications, the H8125 stands as a solid investment for anyone looking to elevate their woodworking capabilities.
Top Page Image Contents