Grizzly H8125 Daily Maintenance, Lubrication, Changing LED Light Attachment Batteries

Page 15

SECTION 5: MAINTENANCE

Daily Maintenance

These procedures should be done after each use:

•Wipe the motor housing, flex shaft, and tool bits with a dry cloth, or blow off the dust and debris with compressed air.

•Check for damage to bits, cords, hous- ing, or other accessories.

Lubrication

Lubricate the flex shaft with a light lithium lubricant or light machine oil after 25–30 hours of use.

To lubricate the flex shaft:

1.Remove the inner spindle from the flex shaft.

2.Wipe a thin film of lubricant on the inner spindle.

Note: Too much lubricant on the inner spindle can become messy and pos- sibly get on your workpiece. DO NOT use automotive grease because it is too thick.

3.Re-install the inner spindle into the flex shaft.

Changing LED Light Attachment Batteries

1.With the light attachment removed from the grinder, unscrew the three Phillips head screws from the rim of the device.

2.Carefully separate the halves of the light attachment and identify the two batteries (see Figure 6).

LED's

Batteries

Figure 6. LED light attachment

components.

3.Replace the batteries with two CR-927 3VDC batteries.

Note: For best performance of the LED light attachment, replace both batteries at the same time. Also, when installing the new batteries, be sure to match the polarity markings in the battery com- partment with the batteries.

4.Bring the two halves of the light attach- ment together and secure with the three Phillips head screws.

Model H8125 9.6V Mini Grinder Kit

-13-

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model H8125 6V Mini Grinder KIT With Flex Shaft Page Table of Contents Safety Safety Instructions for MachineryBefore Operating This Equipment Model H8125 9.6V Mini Grinder Kit Additional Safety Instructions for Mini Grinder Additional Safety Instructions for Batteries and Chargers Foreword Contact Information IntroductionSET UP UnpackingMachine Data Inventory Charging the Battery To charge the batteryOperations Using the LED Light Attachment Installing BitsTo install and use the LED Light Attachment To use the grinder Using the GrinderHigher Speed Uses Lower Speed UsesTo install the flex shaft Installing the Flex ShaftChanging LED Light Attachment Batteries MaintenanceDaily Maintenance LubricationDescription Parts BreakdownWarranty and Returns Page Warranty Card Send a Grizzly Catalog to a friend Name Street CityStateZipBOX BELLINGHAM, WA

H8125 specifications

The Grizzly H8125 is a versatile and robust woodworking machine designed to meet the demands of both amateur and professional woodworkers. Known for its reliability and performance, the H8125 is a dedicated benchtop planer, ideal for those who require precision when flattening and dimensioning boards.

One of the standout features of the Grizzly H8125 is its powerful 15-amp motor, which provides ample power to handle a wide variety of hardwoods and softwoods. This motor ensures that the machine can maintain a consistent feed rate, allowing for smooth and even material removal. Users can expect to achieve a maximum cutting depth of 1/8 inch per pass, which is useful for effectively reducing board thickness to desired specifications.

The H8125 showcases a table size of 20 inches by 10 inches, providing ample support for larger workpieces while maintaining a compact footprint ideal for smaller workshops. The precision-machined aluminum table enhances the overall stability and flatness of the working surface, ensuring accurate results every time.

In terms of technology, the H8125 features a dual-blade cutter head that utilizes high-speed steel knives. This design not only increases cutting efficiency but also ensures a clean finish on the workpieces. The replaceable knives are easily accessible, allowing for quick and efficient maintenance, which contributes to overall productivity.

Additionally, the Grizzly H8125 is equipped with an adjustable depth control system, enabling users to make precise adjustments according to their specific requirements. The easy-to-read scale helps in setting exact depth settings, facilitating repeatable results.

Another notable characteristic of this machine is its integrated dust collection system. The H8125 comes with a dust port that can be connected to standard dust extraction systems, ensuring that the workspace remains clean and free from debris during operation. This feature not only enhances visibility but also promotes a safer working environment.

Overall, the Grizzly H8125 is a highly functional and reliable benchtop planer that combines power, versatility, and ease of use. Its suite of features makes it an ideal choice for woodworkers who prioritize accuracy and efficiency in their projects. Whether for hobbyist use or professional applications, the H8125 stands as a solid investment for anyone looking to elevate their woodworking capabilities.
Top Page Image Contents