INTRODUCTION
ForewordSpecifications
The specifications, details, and photographs in this manual represent the Model T23083 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly.
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
No list of safety guidelines is complete, because every work environment is different. Always consider safety first and use common sense. Failure to use this tool with caution and respect could result in serious personal injury.
Arbor Speed | Variable | |
Arbor Size | ||
Grinding Wheel Diameter | 4" | |
Grinding Wheel Bore | 5⁄8" | |
Grinding Wheel Type | 27 | |
Air Inlet Port Size | 1⁄4" NPT | |
Average Air Consumption | 6 CFM | |
Maximum Air Pressure | 90 PSI | |
Weight | 3 lbs. | |
Inventory
| B |
|
| A |
|
| C |
|
| D |
|
| Figure 1. Model T23083 Inventory. | |
Description | Qty | |
A. | Handle | 1 |
B. Angle Grinder Assembly w/Wheel | 1 | |
C. | Flange Spanner Wrench | 1 |
D. | Arbor Wrench | 1 |
| Assembly |
|
Thread the handle into the housing, as shown in Figure 1 above.
T23083 (Mfg Since 11/10) |